Taskar Fasahar Fasaha - Shafi na 27 daga cikin 35 - mai kera injin dumama

Ƙunƙwasa Ƙarƙashin Ƙarƙwarar Ƙira

Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙwarar Ƙira da Ƙwararren Ƙwararren IGBT

Manufa: Don zafafa zobban zoben zoben 1 3/4 ″, 3 ″ da 6 and da kuma taron wayar jan ƙarfe mai taushi zuwa 3600 F don siyarwa tsakanin sakan uku (3) zuwa shida (6). A halin yanzu ana kammala aikin ta hanyar amfani da soldering iron da sandar ciyar da rosin cored solder. Wannan aikin yana barin dillalan da ba'a so a gefen zoben zoben inda baƙin ƙarfe yake hulɗa. Abokin ciniki yana son ganin ƙaruwa a cikin ingancin haɗin gwiwa ba tare da ɓata lokaci ba.
Abubuwan: 303 Brass Slip Zobba na 1 3/4 ″, 3 ″ da 6 ″ diameters. Sheathed Copper Waya Majalisar.
Resin Core Solder, 37% Pb, 63% Sn.
Zazzabi: 3750F
Aikace-aikace: Ta hanyar gwajin dakin gwaje-gwaje, DW-UHF-20kW ya samar da ingantaccen yanayin shigar da wutar lantarki tare da keɓaɓɓiyar kewaya ta (4) juya “kunnen muff” wanda ya samar da sakamakon mai zuwa:
Lokaci zuwa isa 3750 F suna kamar yadda aka jera a kasa:
- 1 3/4 ″ a cikin dakika 3
- 3 ″ a cikin dakika 3-4
- 6 ″ a cikin dakika 5
An lura da ƙarancin ruwan daɗaɗɗa yana samar da haɗin tsabta.
Ana ba da shawarar ƙaddamar da ƙaddarar rigakafi don saurin samarwa.
An sauƙaƙa ɗora Kwatancen gefe ta hanyar kebul na musamman (4) ta juya “kunnen muff”
Kayan aiki: DW-UHF-20kW ya fitar da ingantaccen yanayin shigar da wutar lantarki ciki harda tashar (1) mai nisa mai dauke da daya (1) 1.0 μFcapacitor, shigar 4-20mA don kwaikwaiyo da sauri, da kuma irin murabba'in kunnen (4) na musamman ”Salon nada.
Yawancin lokaci: 265 kHz

Ƙunƙwasa Wutan Lantarki tare da Ƙaddamarwa

Ƙunƙwasa Wutan Lantarki tare da Ƙungiyar Harkokin Cutar

Makasudin atunƙun mahaɗai masu yawa akan ɗakunan kewayawar hasken rana zuwa 500 ° F (260ºC) a cikin sakan goma don aikace-aikacen siyarwa.
Abune Mai sassaucin hasken rana, Solder Plus Manna 63NC-A, 0.0625 ”(1.59mm) kayatattun mayafin Teflon
Zazzabi 500 ° F (260ºC)
Yanayin 278 kHz
Kayan aiki • DW-UHF-4.5kW tsarin zafin shigarwa sanye take da matattarar aiki tare da itor 1.2 μF capacitor
• coarfin zafin mai sanyawa wanda aka tsara kuma aka haɓaka musamman don wannan aikin.
Tsari Ana amfani da keɓaɓɓiyar keɓaɓɓiyar kewaya don samar da zafi har a yankin inda wayoyi a kan da'irorin rana suka juye. Ana amfani da suturar haske mai laushi mai laushi ga haɗin kewayen kuma ana amfani da ƙaramin matsin lamba akan zanen Teflon don riƙe da'irorin tare. Ana amfani da ƙarfi don daƙiƙa 10 don yawo da manna mai laushi kuma a haɗa wayoyi zuwa da'irorin lankwasawa
Sakamako / Amfanin Induction dumama yana samarwa:
• Sakamakon da ya dace da maimaitawa
• Ƙin wuta mai tsabta
• Hanyar marar amfani

Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarfafawa

Soldering Fiber Optic Cable don Hermetic Sealing Tare da IGBT Induction Soldering Heater

Manufa Don zafin murfin Kovar da fiber optic na USB zuwa 297 ° F a cikin sakan 10 don aikace-aikacen siyarwa, don ƙirƙirar hatimin hatimi
Material Zinariya-mai rufi na USB, Kovar rufe, solder da kuma juyawa
Temperatuwan 297 ºF
Yanayin 360 kHz
Kayan aiki DW-UHF-4.5kW mai ba da wutar lantarki tare da keɓaɓɓen murfin shigar da abubuwa
Tsari An yi amfani da keɓaɓɓen keɓaɓɓen tsari na musamman, 4-juya "C" don ba da zafi iri ɗaya ga taron a kusa da yankin haɗin gwiwa. Tare da wannan ƙirar, ana iya saukar da murfin kai tsaye zuwa haɗin gwiwa; ba lallai ba ne don ciyar da haɗin haɗin ta cikin murfin. An yi amfani da Flux a cikin taron inda za'a haɗa murfin da kebul na fiber. An yi amfani da ikon RF na tsawon daƙiƙa 10, wanda ya haifar da mai narkewar ya narke kuma ya gudana.
Sakamako / Fa'idodi Daidaito da maimaita sakamakon da aka samu tare da samar da wutar lantarki DW-UHF-4.5kW da sake zagayowar zafi na 10 na biyu. Theararren ya gudana daidai kuma ya haɗa igiyar fiber optic zuwa
da Kovar ferrule. Tare da ƙaramin zane na shigarwar motsa jiki, ƙaramin yanki kaɗan ya yi zafi tare da daidaiton daidai.

Inganta fiber optic cable

Ƙarƙashin ƙera fiber optic na USB tare da ƙananan ƙarfin ƙarfafawa raka'a

Manufa Don zafin murfin zinare da kebul na fiber zuwa na 475 ° F a cikin sakan 8 don aikace-aikacen siyarwa
Abubuwan da ake amfani da shi na zinariya-plated rufi, fiber opic cable, solder preform
Temperatuwan 475 ºF
Yanayin 270 kHz
Kayan aiki DW-UHF-4.5kW mai ba da wutar lantarki tare da keɓaɓɓen murfin shigar da abubuwa.
Tsari An yi amfani da keɓaɓɓiyar murfin farantin karfe ta musamman wacce aka kera don samar da zafi iri ɗaya ga taron fiber optic. An sanya taron a cikin abin da aka tsara na musamman, sannan aka sanya shi a cikin murfin shigar da shi. An yi amfani da ikon RF har sai da mai siyarwar ya gudana kuma ya ƙirƙiri haɗin gwiwa.
Sakamako Masu dacewa da maimaitawa an samu ta amfani da ƙarfin DW-UHF-4.5kW da murfin shigarwa tare da sake zagayowar zafin jiki na 5 zuwa 7, gwargwadon nau'in siyarwar da aka yi amfani da shi (duba jadawalin mai siyarwa a ƙasa).

Ƙunƙwasa Hanyoyin Hanya

Ƙunƙwasa Ƙarƙashin Ƙarƙashin Harkokin Kayan Wutar Lantarki Tare da Kayan Gwaninta na IGBT Mai Girma

Manufa Don zafin mahaɗin da yawa a kan ɗamarar da'ira zuwa 180-200 ° F a cikin sakan bakwai don aikace-aikacen siyarwa.
Kayan Abinci da aka haɗe shi da filastik ɗin igiya mai lankwasa, Solder derara Manna 63NC-A, 0.0625 ”kayatattun mayafin Teflon
Temperatuwan 183 ° F
Yanayin 278 kHz
Kayan aiki DW-UHF-4.5kW samar da wutar lantarki, tashar zafi mai nisa tare da mai karfin 1.2 μF da keɓaɓɓiyar murfin shigar da abubuwa.
Tsari An yi amfani da keɓaɓɓiyar keɓaɓɓiyar keɓaɓɓiya don samar da zafi ko da a yankin da yatsun layin da ke juyawa suka yi aiki. Anyi gwajin farko don kafa tsarin dumama da ƙayyade lokaci-zuwa-zafin jiki. Bayan an sanya suturar haske mai haske ta manna ɗin solder zuwa haɗin kewayen, ƙarami
an yi amfani da adadin matsa lamba a kan zanen Teflon don riƙe da'irorin tare. An yi amfani da ikon RF don sakan 6.5 don yawo da manna mai siyarwa kuma ya ɗaura daƙatattun da'irorin
Sakamako Daidaito da maimaitaccen sakamako an samu ta amfani da ƙarfin DW-UHF-4.5kW a cikin dakika 6.5 a 183 ° F.

Sanya Waya Wuta tare da Nuni

Ƙarƙashin Wutar Wuta ta Wuta ta Rediyo Tare da Wurin Kayan Gwaninta na IGBT

Manufa Don zana taron eriya mai haɗuwa zuwa 600 ° F a cikin sakan 2 don aikace-aikacen siyarwa. Makasudin haɓakawa akan tsarin data kasance tare da baƙin ƙarfe wanda ake buƙata sakan 10 zuwa 15.
Abun .250 ”diamita na eriya eriya na aluminium, allon aluminium, mai siyar da solder, zazzabi mai nuna fenti
Temperatuwan 600 ° F
Yanayin 333 kHz
Kayan aiki DW-UHF-4.5kW samar da wutar lantarki, tashar zafi mai nisa tare da mai karfin 1.2 μF da keɓaɓɓiyar murfin shigar da abubuwa.
Tsari An gudanar da gwaje-gwaje na farko tare da yanayin zafin jiki wanda ke nuna fenti don ƙirƙirar bayanan dumama da ƙayyade lokaci-da-zafin jiki. Daga nan sai aka sanya manna din din din din din din din din din din din din din din din din din din din din din din din din din din din din din din din din din din din din din din din din din din din din din din din din din kuma ya kuma dasa shi da almani. An yi amfani da wutar RF na dakika biyu don zafi da gudana haɗin haɗin mai.
Sakamako Daidaito da maimaitaccen sakamako an samu cikin tsarin da aka buƙata na dakika biyu. Bincike na kusa game da mahaɗin mai siyarwar ya nuna cewa mai sayarwar ya gudana da kyau kuma ya kafa mai kyau, mai haɗin gwiwa.

Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙasa

Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙasa

Manufa Gama wani taro na ƙaramin, mahaɗan ƙarfe haɗe da tagulla.
Kayan Kimanin. 1/8 "(3.2mm) mai hade da zinare mai nauyin zinare, 1" (25.4mm) murabba'in x 1/4 "farin toshe tagulla
Zazzabi 600 ° F (315.6ºC)
Yanayin 240 kHz
Kayan aiki • DW-UHF-6kW tsarin zafin shigarwa sanye take da matattarar matattarar aiki.
• coarfin zafin mai sanyawa wanda aka tsara kuma aka haɓaka musamman don wannan aikin.
Tsari Ana amfani da kebul mai jujjuya biyu don samar da zafi iri ɗaya ga ɓangarorin sassan. Ana amfani da manna mai narkewa da juzu'i a yankin haɗin gwiwa kuma ana amfani da ƙarfi na dakika 20 don siyar da sassan. Daidai
Ana buƙatar jingina don ɗaukar sassa a matsayi.
Sakamako / Amfanin Induction dumama yana samarwa:
• Mahimmanci, zafin jiki na musamman zuwa wasu yankuna na bangare
• Neat kuma tsaftace gidajen wuta
• Ayyuka marasa amfani

Ƙunƙwasa Heat Sauti

Uunƙarar atunƙarar Setaddamar da Memwaƙwalwar pewaƙwalwar peira tare da IGBT Induction Heater

Manufa Gama karfe ya mutu zuwa 975 ° F (523.8ºC) don saita (warkarwa) gwalwar ƙwaƙwalwar ajiyar siffar a madaidaicin matsayi.
Kayan Nitinol waya, 2 ”(50.8mm) diamita mai zafin karfe ya mutu, bututun karfe ya zama mai mutu, mannewa nan take
Zazzabi 975 ° F (523.8ºC)
Yanayin 131kHz
Kayan aiki • DW-UHF-6kW tsarin zafin shigarwa sanye take da matattarar matattarar aiki mai ɗauke da μ capacitor 1.0 oneF
• coarfin zafin mai sanyawa wanda aka tsara kuma aka haɓaka musamman don wannan aikin.
Tsari Ana amfani da murfin mai juyi sau biyar don dumama karfen ya mutu. Nitinol na waya an saita shi cikin mutu kuma an sanya shi cikin wuri ta amfani da mannewa nan take. Ana sanya mutu a cikin bututun ƙarfe mafi girma. Maganin mutuwa yana mai tsanani zuwa 945ºF (507.2ºC) a cikin sakan 75. An sami nasarar saitin zafi mai kyau na wayar Nitinol cikin dakika 15.
Sakamako / Amfanin Induction dumama yana samarwa:
• Azumi, mai kyau, maimaita wuta
• Ana saukar da wutar kawai a inda ake bukata

Sakamakon Sashin Kayan Kayan Kayan Kayan Kayan Kayan Hotuna

Sashin Harkokin Kayan Wuta Mai Sanya Domin Ƙwararren Hotuna Tare da Gidan Hutun Nasihu na IGBT

Makasudin atingarfe sassan karfe zuwa 1900ºF (1038ºC) don aikace-aikacen taken zafi
Matakan sassan jiki tare da 7 / 16 "(11.11mm) OD da sashin yumbu
Zazzabi 1900 ºF (1038ºC)
Yanayin 440 kHz
Kayan aiki • DW-UHF-6kW tsarin dumama wuta, sanye take da matattarar matattarar aiki mai ɗauke da ƙarfin 0.66μF ɗaya.
• ilarfin dumama yanayi, an tsara shi kuma an inganta shi musamman don wannan aikace-aikacen.
Tsari Ana amfani da murfin mai juyi huɗu tare da saka yumbu don zafafa ɓangaren 0.75 ”(19mm) na ɓangaren zuwa 1900ºF (1038ºC) na sakan 7.5. Yumbu yumbu don haka sashin baya shigowa
tuntuɓa tare da murfin.
Sakamako / Amfanin Induction dumama yana samarwa:
• heatingarfin hannu mara hannu wanda ba ya haɗa da ƙwarewar mai sarrafa kere kere
• Aikace-aikace na zafi akan aikin aiki tare da daidaito da daidaito
• Ko da rarraba dumama
• Ƙananan matsa lamba da matsanancin ƙarfin raguwa

Ƙunƙwasa Wutan Gudun Hijira Domin Hotuna Mai Sauƙi

Kayan Wuta Kayan Kayan Kwace Don Kwanan Bugawa Tare Da Ƙungiyar Harkokin Sanya Indaction IGBT

Manufa Don zana wayoyin karfe da yawa zuwa 1350ºF (732ºC) don aikace-aikacen taken zafi
Matashi na Taya 0.185 "(4.4mm) OD
Zazzabi 1350 ºF (732ºC)
Yanayin 141 kHz
Kayan aiki • DW-UHF-6 kW tsarin dumama wuta, sanye take da matattarar matattarar aiki wanda ke ɗauke da ƙarfin 0.66itorF ɗaya
• coarfin zafin mai sanyawa wanda aka tsara kuma aka haɓaka musamman don wannan aikin.
Tsari Ana amfani da keɓaɓɓen tashar tashar biyu don dumama wayoyi 12 a lokaci ɗaya don isa ga sassan 130 da ake buƙata a minti ɗaya. An saka wayoyi 0.5 ”(12.7mm) akan tsakiya. Babban 0.3 ”(7.6mm) na wayoyin sune
mai tsanani don 5 seconds don cimma yawan zafin jiki da ake so.
Sakamako / Amfanin Induction dumama yana samarwa:
• heatingarfin hannu mara hannu wanda ba ya haɗa da ƙwarewar mai sarrafa kere kere
• Saukewa daga sakamako na springback
• Ƙara mutuwa
• Kwayar hatsi mai kyau da kuma microstructure
• Ko da rarraba dumama