Taskar Fasahar Fasaha - Shafi na 28 daga cikin 35 - mai kera injin dumama

Matsayin Harshen Hotuna

Matsayin Farko na Farko Don Ƙera Rikicin Dan Adam Tare da Wurin Gidan Cutar IGBT na IGBT

Makasudin atara sandar sanda mai rauni zuwa 1500ºF (815.5ºC) don aikace-aikacen taken zafi
Abun Waspaloy sanda 0.5 "(12.7mm) OD, 1.5" (38.1mm), layin yumbu
Zazzabi 1500 ºF (815.5ºC)
Yanayin 75 kHz
Kayan aiki • DW-HF-45KW tsarin zafin shigarwa, sanye take da matattarar matattarar aiki mai ɗauke da ƙarfin 1.32 66.F guda biyu don jimlar .XNUMXμF
• coarfin zafin mai sanyawa wanda aka tsara kuma aka haɓaka musamman don wannan aikin.
Tsari Ana amfani da murfin mai juyi bakwai don dumama sandar. Ana sanya sandar a cikin murfin kuma ana amfani da wutar don dakika biyu tana samar da isasshen zafin da zai ratsa cikin ciki. Ana amfani da pyrometer na gani don sarrafa zafin jiki na kusa kuma ana amfani da layin yumbu don sandar ba ta taɓa murfin.
Sakamako / Amfanin Induction dumama yana samarwa:
• Ƙananan matsa lamba da damuwa na dan kadan
• Kwayar hatsi mai kyau da kuma microstructure
• Ko da rarraba dumama
• Inganta yawan ƙwayar aiki tare da ƙananan lahani

Ƙunƙasa Cikakken Bakin Ƙara

Ƙunƙasa Cikin Kayan Cikin Kayan Wuta Mai Kyau Ga Hotuna Tare Da Ƙungiyar Kulawa da Ƙungiyar RF

Manufa dumama 300 jerin bakin karfe sanda zuwa 1800ºF (982ºC) don ƙirƙirar aikace-aikace
Abu 1 "(25.4mm) tsawon 300 jerin bakin karfe sanda diameter" (19mm) diamita
Zazzabi 1800 ºF (982ºC)
Yanayin 52 kHz
Kayan aiki • DW-HF-25kW tsarin dumama wuta, sanye take da matattarar aiki mai nisa mai ɗauke da ƙarfin 1.25μF guda biyu don jimlar .625μF
• coarfin zafin mai sanyawa wanda aka tsara kuma aka haɓaka musamman don wannan aikin.
Tsari Ana amfani da murfin mai juyi huɗu don zafin sandar bakin ƙarfe zuwa 1800 ºF (982ºC) na sakan 10. Don dalilai na ƙira yakamata ayi amfani da garkuwar da ba ta da ƙarfi tsakanin kebul da sanda zuwa
kiyaye zafin wuta a kan sanda. Ba a yi amfani da garkuwar kariya ba yayin gwaji.
Sakamako / Amfanin Induction dumama yana samarwa:
• heatingarfin hannu mara hannu wanda ba ya haɗa da ƙwarewar mai sarrafa kere kere
• Inganta yawan ƙwayar aiki tare da ƙananan lahani
• Ƙananan matsa lamba da matsanancin ƙarfin raguwa
• Ko da rarraba dumama

Ƙunƙwasa Cikin Kayan Gilashin Aluminum

Ƙunƙasa Cikakken Gilashin Aluminum don Ƙarshen Kashewa Tare da Kayan Wuta Mai Kyau

Manufa Ta hanyar dumama saman 2 ”(50.8mm) na tarkon iskar oxygen don ƙirƙirar ƙarshen zagaye tare da rami don bawul ɗin oxygen
Abubuwan Alkin iskar oxygen na oxygen tare da ƙarshen ƙarshen 2.25 "(57.15mm) diamita, 0.188" (4.8mm) kaurin bangon
Zazzabi 700 ºF (371 ºC)
Yanayin 71 kHz
Kayan aiki • DW-HF-45kW tsarin zafin shigarwa, sanye take da matattarar matattarar aiki mai ɗauke da itorsarafan 1.5μF biyu don jimlar 0.75μF
• coarfin zafin mai sanyawa wanda aka tsara kuma aka haɓaka musamman don wannan aikin.
Tsari Ana amfani da murfin mai juyi sau biyar don dumama ƙarshen buɗewar iskar oxygen. Tankin yayi zafi na dakika 24 don kaiwa 700 reachF (371 ºC).
Sakamako / Amfanin Induction dumama yana samarwa:
• Uniform ta hanyar dumama
• Yara, azaman ƙarfin makamashi
• Saurin, sarrafawa da kuma maimaitawa tsari
• heatingarfin hannu mara hannu wanda ba ya haɗa da ƙwarewar mai sarrafa kere kere

Ƙungiyar Wuraren Turawa

Ƙunƙasa Cikin Kayan Wuta don Ganawa tare da Rinjin Wuta Hoto na RF

Manufa steelarfin ƙarfe mai ƙwanƙwasa a kan kwantena don sassauta fil ɗin ƙarfe don pin ya iya juyawa
Abubuwan haɗuwa da ƙananan ƙarfe tare da 2.5 "(63.5mm) dia. flange, 1 ”(25.4mm) dia. sanda da zoben fil kusan 4 "(101.6mm) OD da 0.75" (19.05) karfe mai kauri
Zazzabi 1000ºF (538ºC)
Yanayin 282 kHz
Kayan aiki • DW-UHF-20kW tsarin dumama wuta, sanye take da matattarar matattarar aiki mai ɗauke da ƙarfin 1.5itorsF guda biyu don jimlar 0.75μF
• coarfin zafin mai sanyawa wanda aka tsara kuma aka haɓaka musamman don wannan aikin.
Tsari Ana amfani da murfin juzu'i guda don kunna taron. An saka murfin a kusa da fil kuma ana amfani da wuta na dakika 120. Bayan dumama, an saka sandar ƙarfe a cikin zoben fil, matsin lamba shi ne
An yi amfani da shi kuma nau'in ninkin ya yi nasara da yardar kaina.
Sakamako / Amfanin Induction dumama yana samarwa:
• Daidaitacce da daidaitaccen sanyawar zafi ba tare da shafar yankuna kewaye ba
• Mafi yawan tsari lokaci, daga sa'o'i zuwa minti
• Sakamakon maimaitawa da ma'ana
• Ko da rarraba dumama

Fuskar Hotuna ta Induction

Babban Farantin Sanya Hanya Mai Sauƙi tare da Rufin Tin don Flowanƙan-Ruwa

Manufa Gasa farantin ƙarfe na ƙarfe mai rufi da kwano zuwa 450 ºF (232 ºC) don narkar da ruwa
Abu 7.9 ”(200mm) x 4.7” (120mm) faranti na karfe tare da kwanon rufi na kauri daga 100 zuwa 1000nm, fenti mai zafin jiki, ruwa don kashe
Zazzabi 450 ºF (232 ºC)
Yanayin 350 kHz
Kayan aiki • DW-UHF-20kW tsarin dumama wuta, sanye take da matattarar matattarar aiki mai ɗauke da ƙarfin 0.5itorsF biyu don jimlar 0.25μF
• coarfin zafin mai sanyawa wanda aka tsara kuma aka haɓaka musamman don wannan aikin.
Tsari Ana amfani da murfin salo na “Karen Kashi” mai juyawa tara don aikin narkar da kwararar ruwa. Ana sanya faranti mai ƙarfe mai ƙwanƙwasa mai ƙwanƙwasa a cikin murfin don sakan 1.34 don sake maimaita rufin kwano. Farantin ana shanye shi a cikin ruwan sanyi don adana isasshen ɗan tin ɗin a farfajiyar.
Sakamako / Amfanin Induction dumama yana samarwa:
• Kayan shafawa
• Haske mai da hankali akai

Kwancen Kayan Kayan Gwaninta na Kyau

Kwancen Kayan Kayan Wuta Mai Girma Tare da Kayan Gwaji Mai Ruwa

Manufa Don zafi bututun ƙarfe zuwa 1100ºF (593ºC) don jigilar narkewar magnesium
14.5 (4.42m) dogon karfe mai tsawo tare da 3.5 "(88.9mm) OD
Zazzabi 1100ºF (593ºC)
Yanayin 9 kHz
Kayan aiki • DW-MF-160kW tsarin zafin shigarwa, sanye take da shugaban aiki na nesa mai ɗauke da ƙarfin 25 oneF ɗaya.
• coarfin zafin mai sanyawa wanda aka tsara kuma aka haɓaka musamman don wannan aikin.
Tsari Ana amfani da keɓaɓɓiyar tashar tashar U U ta musamman wacce ake amfani da tsawon bututun a cikin wannan aikace-aikacen. Ana sanya bututun a cikin murfin kuma ana kawo wuta. An saita ƙarfin lantarki kuma ƙarfin wutar yana 100kW. Yayinda bangaren ya kai ga Currie sai karfin ya sauka zuwa 80kW kuma dole ne a kara karfin wuta don cimma 140kW. Bututun ya kai 1100ºF (593ºC) a cikin minti 20.
Sakamako / Amfanin Induction dumama yana samarwa:
• Tsarin sarrafawa da kuma maimaita yanayin zafi wanda ke riƙe
abu a cikin hanyar ruwa
• Mu'amala da muhalli
• Ko da rarraba dumama
• Aikin motsi mai motsi wanda za'a iya zama nesa da wutan lantarki

Ƙunƙwasa Cikakken Bikin Jirgin Ƙungiyar Magnetic Iron

Induction Heating Magnetic Iron Oxide a cikin ruwa don aikace-aikacen hyperthermia

Makasudin Cutar Magnetic baƙin ƙarfe
Abun Magnetic iron oxide a cikin ruwa (magnetic filin shine 50-200kHz, 30kA / m), gilashin gilashin
Temperatuwar Varies
Yanayin 344 kHz
Kayan aiki • DW-UHF-4.5kW tsarin dumama wuta, sanye take da matattarar matattarar aiki mai ɗauke da ƙarfin 0.33 0.66.F guda biyu don jimlar XNUMX μF
• coarfin zafin mai sanyawa wanda aka tsara kuma aka haɓaka musamman don wannan aikin.
Tsari Ana amfani da murfin mai juji biyu don zafin gilashin gilashin. Sakamakon zafin jiki da sakamakon lokaci shine:
• 66º - 107 ºF (19º - 42 ºC) a cikin sakan 10
• 66º - 145 ºF (19º - 63 ºC) a cikin sakan 20
• 66º - 170 ºF (19º - 77 ºC) a cikin sakan 30
Sakamako / Amfanin Induction dumama yana samarwa:
• Saurin sauri da gida
• Yau da zafin rana
• Ƙananan sawun benci
• Ko da rarraba dumama

indurar mai daukar hoto mai ɗaukar hoto

Uunƙwasa mai sanyaya mai ba da izini don sake kunna gilashi don tubes na X-ray

Manufa Heat graphite susceptor don gilashin reflow a cikin masana'antu na x-ray shambura
Kayan Gilashin gilashi 0.98 x 0.12 "(25 x 3mm), mai karɓar hoto, mai riƙe da bakin ƙarfe, Gilashin kararrawa 5.9" (150mm) OD
Temperatuwan 1742 ºF (950º C)
Yanayin 80 kHz
Kayan aiki • DW-HF-25kW tsarin zafin shigarwa, sanye take da matattarar matattarar aiki mai ɗauke da ƙarfin ƙarfin 0.3 μF guda takwas don jimlar 2.4 μF
• coarfin zafin mai sanyawa wanda aka tsara kuma aka haɓaka musamman don wannan aikin.
Tsari Ana amfani da murfin mai juji biyu don dumama. Ana sanya maɓuɓɓugan graphite guda shida a cikin yanayin nitrogen tare da fayafai na gilashi da mariƙin ƙarfe. A cikin dakika 32 an kai zafin da ake buƙata na 1742 ºF (950º C) wanda ya haifar da gilashin sakewa & mai riƙe da bakin ƙarfe ya narke ta gilashin.
Sakamako / Amfanin Induction dumama yana samarwa:
• productionara samarwa, abokin ciniki a halin yanzu dumama masu kamfani guda 4
• 50% žasa žarfin wutar lantarki
• Ko da rarraba dumama

Ƙunƙasa Cikin Kayan Kayan Cutar

Ƙarƙashin gyaran gyare-gyaren gyare-gyare na ƙwanƙwasa don ƙwanƙwasa ƙwanƙwasa tare da Tsarin Kayan Yanayin Kwace

Manufa Don zafin ƙarfe ya daidaita zuwa 392ºF (200ºC) wanda za'a yi amfani dashi akan latsawa don lalata ƙarfin roba
Ma'adinan 13.4 "XMLM" (340mm), 2.16 "(55mm) nisa,
kamar 77.2 lbs (35kg)
Zazzabi 392ºF (200ºC)
Yanayin 20kHz
Kayan aiki • DW-MF-70kW tsarin dumama wuta, sanye take da matattarar matattarar aiki wanda ke ɗauke da ƙarfin ƙarfin 0.3μF takwas don jimlar 0.6μF
• coarfin zafin mai sanyawa wanda aka tsara kuma aka haɓaka musamman don wannan aikin.
Tsari Ana amfani da murfin pancake guda goma sha uku don dumama bangarorin biyu a lokaci guda na sakan 170 don isa zafin jiki na waje na 392ºF (200ºC). Isarfin yana ci gaba da raguwa a cikin dakika 390 na gaba don zuwa daidaitaccen zafin jiki na 392ºF (200ºC) ± 41ºF (5ºC) ko'ina cikin
mold.
Sakamako / Amfanin Induction dumama yana samarwa:
• Maimaitawa da zafi
• Saurin lokaci tsari, ƙãra samarwa
• Ko da rarraba dumama

Fitar da Kayan Kayan Wuta Don cire Cire filastik

Ƙungiyar Wuta Kayan Gyara Don cire Cikar filastik tare da RF Rashin Kayan Gida

Manufa Maido da rufin polypropylene daga ramin bututun ƙarfe don ba da damar sake amfani da duka tubunan da rufin.
Abubuwan Wuraren Harsunan 1 / 8 "(0.318 cm) zuwa 5 / 8" (1.59 cm) ID
Rufin polypropylene mai karewa
Zazzabi 150 ºC (302 ° F)
Yanayin 185 kHz
Kayan aiki • DW-UHF-4.5kW tsarin dumama wuta, sanye take da matattarar matattarar aiki mai ɗauke da μ 1.5 μF capacitor
• coarfin zafin mai sanyawa wanda aka tsara kuma aka haɓaka musamman don wannan aikin.
Tsari / Labari Ana amfani da akwatin akwatin wasiƙa mai sau shida don zafin bututun ƙarfe na ciki. Rufin filastik ya yi laushi sosai don sauƙin cirewa da sake yin fa'ida. Lokacin da ake buƙata don narkar da filastik daga mita ɗaya na waya kusan 45 ne. Wannan ya bambanta dangane da diamita na bututun.
Sakamako / Amfanin Ƙarfafawa ta jiki shine kawai hanyar da za a iya cire takarda filastik,
bar shi a cikin wani nau'i na gurɓatacce don sake amfani. Hanya ce ta aiki da sauri kuma kuma tana ragewa a sawun ƙarancin kamfanin.