Ƙusar Brazing Aluminum

Induction Aluminum Brazing: Dabaru da Fa'idodin An Bayyana

Induction Aluminum Brazing: Dabaru da Fa'idodin Bayyanawa Induction brazing aluminum tsari ne wanda ya ƙunshi haɗa guda biyu ko fiye na aluminum ta amfani da ƙarfe mai filler. Ana amfani da wannan tsari sosai a cikin masana'antar kera motoci, sararin samaniya, da HVAC, da sauransu. A cikin wannan labarin, za mu tattauna tushen induction aluminium brazing da fa'idodin sa. … Karin bayani

Bututun Aluminum Induction Brazing

Domin ƙara haɓaka aiki da kuma rage tasirin zafi na dumama ƙarfe, ana ba da shawarar fasahar brazing induction. Amfanin wannan fasaha ya ƙunshi musamman a ainihin wurin dumama da aka kawo zuwa ga haɗin gwiwa. Dangane da sakamakon kwaikwaiyon lambobi sannan ya yiwu a tsara sigogin da suka wajaba don cimmawa… Karin bayani

Brazing Tubes Aluminum tare da Hearfin Indasa

Induction Brazing Tubes Aluminum tare da High Frequency Induction Heating Abubuwan aikace-aikacen da ake amfani da su a yankuna na shigar dumama suna buƙatar nazarin rarraba yanayin zafin jiki a cikin abubuwan da aka zafafa la'akari da abubuwan da suka dace da kayan kaddarorin. Hanyar iyakantaciyar hanya (FEM) tana ba da kayan aiki mai ƙarfi don yin irin waɗannan nazarin da haɓaka abubuwan tafiyar dumama ta hanyar… Karin bayani

Brazing Aluminum bututun zuwa ga Aluminium bangarorin

Manufa Manufar gwajin aikin ita ce shigar da tubing na aluminum zuwa sassan aluminum a cikin kasa da dakika 15. Muna da tubing na aluminum da “mai karɓar” aluminum. Girman takalmin gyaran gashi wani zoben allo ne, kuma yana da yanayin zafin jiki na 1030 ° F (554 ° C). Kayan aiki DW-HF-15kw shigar da inji mai ɗumama Induction dumama kayan aiki • Aluminium… Karin bayani

Aljihun katuwar bakin karfe bututu

Manufa Babban mitar shigar da bututu na aluminium Kayan aiki DW-UHF-6kw-III na’urar brazing na’urar hannu mai amfani da kayan aiki uminumluminium zuwa bututun ƙarfe wanda aka haskaka a 0.25 ”(6.35mm) Brazed zuwa bututun ƙarfe 0.19” OD (4.82mm) Powerarfi: 4 kW Zazzabi: 1600 ° F (871 ° C) Lokaci: Sakamakon 5 sec da lusarshe: uarfin zafin jiki yana bayar da: jointsarfin haɗin gwiwa mai ƙarfi Mai zaɓa da madaidaicin yankin zafi, wanda ke haifar da ɓarna da ƙananan… Karin bayani

Al'adun Jirgin Turancin Jirgin Allon mai ciki

High Frequency Induction Brazing Aluminium Tube T Haɗa Maƙasudin uunƙwasa ƙarfin ƙaruwa da yawa a cikin haɗin haɗin aluminum T tube na kasa da 10 seconds kowane kuma brazing wani aluminum dace a cikin wani aluminum tube 1.25 ″ (32mm). Aikace-aikacen game da brazing ne na wani bututun aluminium wanda yake kunshe da bututu biyu masu layi daya tare da diamita na waje… Karin bayani

Ƙusar Brazing Aluminum Autotive

Ƙusar Brazing Aluminum Autotive 

Manufar: Gilashin aluminum don aikace-aikacen gwaninta
Abubuwan: Tubin Aluminium 0.50 (12.7mm) dia, maigadin aluminum 1 ”(25.4mm) mai tsayi, ya cika zoben tagulla
Zazzabi: 1200 ºF (649 ºC)
Yawancin lokaci: 370 kHz
Kayan aiki • DW-UHF-10KW tsarin dumama wuta, sanye take da matattarar aiki mai nisa wacce ke dauke da masu karfin 1.0μF daya na jimlar 1.0 μF
• coarfin zafin mai sanyawa wanda aka tsara kuma aka haɓaka musamman don wannan aikin.
Tsari Ana amfani da murfin pancake mai yawa don dumama hadin gwiwa tsakanin bututun aluminum da shugaba. Heungiyar haɗin gwiwa ta zafin jiki a cikin mintuna 1.5 kuma zoben tagulla ya narke yana yin katako mai ƙyalli
hadin gwiwa.
Sakamako / Amfanin Induction dumama yana samarwa:
• heatingarfin hannu mara hannu wanda ya ƙunshi ƙarancin ƙwarewar masaniyar masana'antu
• Aikace-aikacen marasa amfani
• Dogaro, mai daɗaɗɗen haɗin gwiwa mai kyau
• Ko da rarraba dumama

Ƙarƙasa Aluminum zuwa Tubbaran Turawa tare da Hanya

Ƙarƙasa Aluminum zuwa Tubbaran Turawa tare da Hanya

Makasudin: Domin ƙona wutar aluminum zuwa 1050 ºF (566 ºC) don aikace-aikace na brazing:

abu:

  • Cu bututu (3/4 ″ / 19mm)
  • Cu bututu (5/8 ″ / 15.8mm)
  • AI tubes (3/8 ″ /9.5mm)
  • AI da yawa (5/8 ″ /15.8mm)
  • AI da yawa (3/4 ″ /19mm)
  • Lucas-Milhaupt Neman 30-832 mai mahimmanci
  • Gidan waya

Zazzabi 1050 ºF (566 ºC)

Yanayin 260 kHz

Kayan kayan aiki DW-UHF-10KW 150-500 kHz shigar da wutar lantarki da aka ajiye tare da tashar wutar lantarki wanda ke dauke da masu amfani 1.5 μF biyu.

  • Hanyar da aka ba da wutar lantarki mai sauƙi biyu da aka tsara da kuma bunkasa musamman ga taron alummar
  • Hanyar da za a shigar da shi a cikin sau biyar mai kwakwalwa wanda aka tsara da kuma bunkasa musamman don ƙwanƙwasa tubunan Cu zuwa taron hadin gwiwa ta AI

Tsarin gyaran gyare-gyare: an tsara nau'i-nau'i kafin su dace da shamban aluminum. Daga nan sai aka sanya nau'ukan aluminum hudu a cikin mutane da dama kuma an saka taron a cikin akwatin. An yi tsanani da taron don kimanin 70 seconds, a daidai lokacin da ya kai ga zafin jiki da aka yi amfani da ita ya yi ta gudu. Ga kwandunan Cu, an shirya su ne don suyi, sun kasance a kusa da shambura, kuma an sanya taron a cikin akwatin. Lokacin sake zagayowar yanayin zafi yana kusan 100 seconds. Wasu kayan aikin da ake buƙata na yin amfani da itace don yin gyare-gyare don cika dukkanin sashin layi saboda ƙananan waya. Idan an kara tsawon lokacin sake zagayowar, za'a kawar da buƙatar tsayawar itace.

Sakamako / Amfanin: Tsaida, maimaitawa:

  • Abokin ciniki ya buƙaci madaidaici da maimaitaccen zafi fiye da tocilan da zai iya isar da shi, wanda haɓakawa ya sami damar cimmawa.
  • Maganin yanayin zafi: Induction yana ba da izini don kulawa da zafin jiki mafi girma idan aka kwatanta da wasu hanyoyi, ciki har da tayin, wanda abokin ciniki yake so

 

Ƙusar Brazing Aluminiyoyi

Ƙusar Brazing Aluminiyoyi

Manufar: Turawa biyu na bututun gas biyu a lokaci daya zuwa ainihin magungunan aluminum

Abun abu 2 bututun aluminium 0.72 ″ (18.3mm) diamita, mai daskarewa 9.88 ″ x 10.48 ″ x 1.5 ″ mai kauri (251mm x 266.3mm x 38mm), zoben tagulla

Zazzabi 610 ºF (321 ºC)

Yanayin 250 kHz

Kayan aiki • DW-UHF-20KW tsarin yin amfani da wutar lantarki, sanye take da wani matashi mai nisa wanda ke dauke da na'urorin 1.5μF guda biyu don jimlar 0.75μF • An shigar da sautin wutar lantarki da aka ƙaddamar musamman don wannan aikace-aikacen.

Tsarin aiki Ana amfani da maɓallin pancake guda hudu da ke cikin Littafi Mai Tsarki don yin amfani da bututu na 2 a lokaci guda. Ana ba da zobba uku a kan kowane haɗin gwiwa kuma an yi amfani da wutar lantarki don 90-100 na biyu don ƙirƙirar haɗin gwiwa a kan duka bututu. Bayani • Abokin ciniki yana buƙatar lokacin zafi na 40 a lokacin zafi na biyu. Don haɗuwa da wannan nau'ikan 3 da ake buƙatar za a yi amfani da su don yin amfani da mahallin 2 don kowane jimlar 6 a cikin 90-100 seconds. Abokin ciniki a halin yanzu yana amfani da tsari na ƙwayar wuta wanda zai iya ƙone murfin da ke cikin yankin haɗin gwiwa kuma ya ƙirƙirar sassa. Ta hanyar sauyawa don yin amfani da wannan aikace-aikacen abokin ciniki yana rage ƙananan sassansu kuma yana ƙaruwa da ƙimar haɓaka.
Sakamako / Amfanin Induction dumama yana samarwa:
• Maɗaukakiyar raƙuman kayan aiki
• Ƙara yawan sashi, ƙananan raguwa
• Ƙaƙwalwar kyautar hannu wanda ba ya haɗa da fasaha na masana'antu don masana'antu
• Ko da rarraba dumama

=