Manufa
Manufar gwajin aikace-aikacen shine shigar da baƙin ƙarfe bututun ƙarfe zuwa ga sassan aluminum a ƙasa da sakan 15. Muna da tubalin aluminum da kuma “mai karɓar aluminum”. Aluminihin baƙin ƙarfe ne mai ƙyalli na ƙarfe, kuma yana da zazzabi mai nauyin 1030 ° F (554 ° C).
Kayan aiki
DW-HF-15kw induction injin injin din
injin wutar lantarki HF-15Materials
• bututun aluminum: 0.167 "(4.242mm) OD, 0.108" (2.743mm) ID
• Abubuwan Aluminum: ID .1675 ”(4.255mm), zurfin .288” (7.315mm),
chamfer a saman yanki shine 0.2375 "(6.033mm) ID max
• Girman baƙin ƙarfe a cikin nau'i na zobe alloy mai sau biyu
• Flux
Key Siffofin
Zazzabi: 1030 ° F (554 ° C)
Powerarfi: 5 kW
Lokaci: NUMan 14
tsari:
- Abubuwan haɗin Aluminium da bututu suna haɗuwa tare da zoben alloy. An kara ruwa.
- An sanya bangare a cikin murhun shigowa.
- An gudanar da gwaje-gwaje da yawa tare da lokuta daban-daban don tabbatar da lokacin dumama don ƙarfin bra.
- A 15 seconds taron ya narke.
- A 14 seconds, muna da nasara don brazing aluminium zuwa aluminum, kuma an sami ingantaccen haɗin gwiwa na baƙin ƙarfe.
Sakamako / Amfanin:
Tsarin dumama na kW 5 kW wanda abokin ciniki ya buƙaci, zai cika bukatun abokin ciniki na lokacin shigowa bra bra.
- Controlaukar iko da lokaci da yawan zafin jiki
- Onarfi akan buƙatu tare da hawan hanyoyin zafi
- Maimaita tsari, ba mai dogaro da afareta ba
- Safe shigar da dumama ba tare da bude wuta ba
- Kuzari mai amfani da makamashi
