Technologies

Ƙusar Brazing Aluminum Autotive

Ƙusar Brazing Aluminum Autotive 

Manufar: Gilashin aluminum don aikace-aikacen gwaninta
Abubuwan: Tubin Aluminium 0.50 (12.7mm) dia, maigadin aluminum 1 ”(25.4mm) mai tsayi, ya cika zoben tagulla
Zazzabi: 1200 ºF (649 ºC)
Yawancin lokaci: 370 kHz
Kayan aiki • DW-UHF-10KW tsarin dumama wuta, sanye take da matattarar aiki mai nisa wacce ke dauke da masu karfin 1.0μF daya na jimlar 1.0 μF
• coarfin zafin mai sanyawa wanda aka tsara kuma aka haɓaka musamman don wannan aikin.
Tsari Ana amfani da murfin pancake mai yawa don dumama hadin gwiwa tsakanin bututun aluminum da shugaba. Heungiyar haɗin gwiwa ta zafin jiki a cikin mintuna 1.5 kuma zoben tagulla ya narke yana yin katako mai ƙyalli
hadin gwiwa.
Sakamako / Amfanin Induction dumama yana samarwa:
• heatingarfin hannu mara hannu wanda ya ƙunshi ƙarancin ƙwarewar masaniyar masana'antu
• Aikace-aikacen marasa amfani
• Dogaro, mai daɗaɗɗen haɗin gwiwa mai kyau
• Ko da rarraba dumama

Ƙunƙwasawa Ƙananan Rukuni Tare da Ƙaddara

Ƙunƙwasawa Ƙananan Rukuni Tare da Ƙaddara

Makasudin: Don ƙarfafan tubar mota na lantarki zuwa na'urar "T"
Kayan aiki 1 ”(25.4mm) bututun ƙarfe na diamita, madaidaicin ƙarfe, tagulla da baƙar fata
Zazzabi 1400ºF (760ºC)
Yanayin 200 kHz
Kayan aiki • DW-UHF-10 kW tsarin dumama wuta, sanye take da matattarar matattarar aiki mai ɗauke da na'urori masu ƙarfin 1.0μF guda biyu don jimlar 0.5 μF
• coarfin zafin mai sanyawa wanda aka tsara kuma aka haɓaka musamman don wannan aikin.
Tsari Ana amfani da murfin mai juzu'i huɗu don zana taron ƙarfe zuwa 1400ºF (760ºC) na sakan 85. Coirƙirar murfin yana ba da damar ƙarfen ƙarfe don faɗaɗa nesa da bututun ƙarfe wanda ke ba da damar yin kwalliya ta gudana ta haɗin gwiwa. Adadin gami na tagulla ana sarrafa shi ta hanyar sulɓi tagulla wanda ke ba da haɗin haɗin gwiwa mai daɗi.
Sakamako / Amfanin Induction dumama yana samarwa:
• heatingarfin hannu mara hannu wanda ba ya haɗa da ƙwarewar mai sarrafa kere kere
• Daidaitawa da kuma rarraba kayan wuta
• Rage tarin juyi a kan murfin ya ragu saboda ingantaccen tsarin zane.

Brazing Carbide To Karfe Shank

Brazing Carbide To Karfe Shank tare da Induction

Manufar: Gwanƙan hawan hakora zuwa ƙirar karfe a kasa da minti 5
Abubuwan: Muƙamuƙin bututun ƙarfe, 0.5 "(12.7mm) dia, 1.25" (31.75mm) tsayi, 0.25 "(6.35mm) haƙoran carbide masu kauri, baƙar fata da kuma azurfa tagulla tagulla shims
Zazzabi: 1292ºF (700ºC)
Yawancin lokaci: 300kHz
Kayan aiki • DW-UHF-10kW tsarin dumama wuta, sanye take da matattarar matattarar aiki mai ɗauke da maɓallin ƙarfin 0.66μF ɗaya
• coarfin zafin mai sanyawa wanda aka tsara kuma aka haɓaka musamman don wannan aikin.
Tsarin tsari: Ana amfani da murfin mai jujjuyawar rectangular guda biyu don zafin carbide da ƙarfe zuwa 1292ºF (700ºC) na mintuna 4 zuwa 5. Brass shims guda uku suna sarrafa adadin braze kuma har ma da zafi yana ba da izini
Kyakkyawan gudummawa na kirkirar kirkirar kirkirar kirki mai ban sha'awa.
Sakamako / Amfanin Induction dumama yana samarwa:
• heatingarfin hannu mara hannu wanda ba ya haɗa da ƙwarewar mai sarrafa kere kere
• Tsayawa, mai daɗaɗɗen ƙarfafawa mai ban sha'awa
• Ko da rarraba dumama

Ƙunƙarar Ƙunƙwasawa Ƙunƙwasa

Ƙunƙarar Ƙunƙwasawa Ƙunƙwasa

Manufa
1ST Aikace-aikacen: Ƙungiyar taro ta ƙwanƙwasawa zuwa mariƙin buƙata
2nd Aikace-aikacen: Gyara Babban tube don haɗawa
Abubuwan: Aikace-aikacen 1: Haɗin ƙarfe da allura 0.1 ″ dia (2.5mm) Aikace-aikace Na Biyu: tubearfin karfe 2 ″ OD (1 mm) da zobe
Zazzabi 1400 ºF (760 ºC)
Yanayin 325 kHz don ƙarfafa allurar 0.1 ″ dia (2.5mm) 259 kHz don zoben brazing zuwa bututun ƙarfe 1 ″ OD (25.4 mm)
Kayan aiki • DW-UHF-4.5KW tsarin ƙwaƙwalwa, sanye da shi tare da
madaidaiciyar aiki wanda ke dauke da biyu .66 μF masu ƙwaƙwalwar ajiya don jimlar 1.32 μF
• Ƙarar wuta ta biyu, da aka shirya da kuma ƙaddamar musamman don wannan aikace-aikace biyu.

Aikace-aikacen 1st aikace-aikacen: An yi amfani da murhun mawallafi guda biyu don shafe taro a kan mai mahimmanci don 10 seconds. Jirgin yana damu da zafi a kan ɗakin kawai, yayin da allurar ke da ƙarfin hali da kuma kayan da ba a haɓaka ba. Ƙananan
ana yin amfani da waya mai zurfi don samar da cikakken isasshen ƙirar kirkirar ƙirƙirar ƙaƙƙarfan ƙaƙƙarfan ƙira. Aikace-aikacen 2nd: An yi amfani da murhun mawallafi guda uku don ƙarfafa babban bututu zuwa haɗin haɗin don 3-5 mintuna. Ƙarar ƙawan ƙarfe
amfani da su don samar da isasshen ƙuƙwalwar ƙira don ƙirƙirar ƙaƙƙarfan abin ƙyama.

Sakamako / Amfanin Induction dumama yana samarwa:
• Ko da rarrabawar dumama, yana samar da maɗaura na ƙaran ƙarfe don haɗin mai daɗi
• Sassaucin tsarin damar izinin guda ɗaya don amfani da aikace-aikacen daban-daban guda biyu wanda shine adadin kuɗi.

Gwanon Giraben Giraguwa tare da Hanya

Gwanon Giraben Giraguwa tare da Hanya

Manufar: Don ƙarfafa motar bus din tare
Abubuwan: • sandunan bas na tagulla 2 ″ (6mm) mai faɗi, 152.4 ′ (2mm) tsayi, 609.6
sandunan jan ƙarfe 6 ″ (152.4mm) mai faɗi, 18 ″ (457.2) mai tsayi & 3/8 ″ (9.65mm) mai kauri
Zazzabi: 1292 ºF (700 ºC)
Yawancin lokaci: 80 kHz
Kayan aiki • DW-UHF-60KW tsarin ƙwaƙwalwa, sanye da shi tare da
Kayan aiki mai kwakwalwa wanda ke dauke da na'ura mai lamba takwas na 1.0 μF domin jimlar 2.0 μF.
• Wutar da za ta haɓaka, an shirya da kuma ƙaddamar musamman don wannan aikace-aikacen

Tsarin aiki: Ana yin amfani da murhun mai amfani da sau uku mai zafi don shafe taron. Abun ƙarfe uku da aka shimfiɗa a tsakanin faranti kuma an yi amfani da haɗin gwanin ga taron. Yana da zafi don 5 mintuna don kwarara kwararon ƙulla. A halin yanzu mai haɓaka mai kyau, ƙarancin zane mai ban sha'awa yana samuwa.

Sakamako / Amfanin Induction dumama yana samarwa:
• Yayinda aka samar, sassa masu kyau
• Kaɗa a cikin sashi da ya raba daidai tsakanin sassan ƙarfe, da ƙyale har ma ya kwarara da kuma yin amfani da ƙyallen ƙafa
• Aikin ba tare da hannu ba wanda baya buƙatar ƙwararrun masu aiki

Ƙarƙashin Brazing Carbide zuwa Karfe

Induction Brazing Carbide to Karfe Manufar: Braze hannun carbide zuwa ƙarfe 'T' shank Material: 2.0 Material (51mm) OD carbide sleeve, 1.0 ″ (25.5mm) babban haɗin haɗin braze, 1.5 "(38 mm) ƙarfe 'T', 50% zoben tagulla na zafin jiki Yanayin zafin jiki: 1292 ºF (700 ºC) Mitar: 257 kHz Kayan aiki • DW-UHF-6KW-I tsarin dumama yanayi, sanye take da m… Karin bayani

Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙasa Tare Da Ƙaddara

Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙasa Tare Da Ƙaddara 

Manufar: Don yin fushi da maɓallin O-Ring (ORFS) ko kuma mai haɗa namiji zuwa wani bututu na karfe.

Material

• Rigin na'ura, 1 inch (2.54 cm) OD

• Manyan fuska mai kunnen bakin ciki da kuma kayan haɗin namiji

• Shirya zobba na tsabta

• White SureFlow hawan

• Goyan bayan goge kayan aiki

Zazzabi 1300 ºF (704 ºC)

Yanayin 200 kHz

Kayan aiki

• DW-UHF-20KW tsarin hawan ƙarfe, sanye take da wani matashi mai nisa wanda ke dauke da na'urori biyu (2) 1.5 μF masu amfani (domin duka 0.75 μF).

• An shigar dashi mai kwakwalwa wanda aka tsara da kuma inganta musamman don wannan aikace-aikacen.

Tsarin Aiki 2.75 inch (7.0 cm) ID na haɗin gizon da aka yi amfani da shi don yin amfani da ƙananan bututun ƙarfe da kuma sutura ta ORFS ko mai haɗin mawaki na ORFS. An tsara wannan sigin don yin gyaran fuska ko dai sutura ko mai haɗa namiji zuwa tube. Ƙungiyoyin da za a yi ƙarfin su suna haɗuwa tare da haɗari kuma suna mai tsanani don 45 seconds. Ana amfani da ƙarfin damuwa a cikin bututu don tabbatar an saka shi cikakke a cikin kayan aiki kamar yadda ƙirar ƙirar ke gudana.

Sakamako / Amfanin Amfani:

• Manyan Ƙananan diamita na ciki yana ba da izini don sauƙaƙewa da sauke kayan

• An kawar da haɓakar makamashi mai dacewa daga cikin murfin zuwa kayan wanke kayan aiki.

Brazing Carbide-Kayan Gana da Nuni

Brazing Carbide-Kayan Gana da Nuni

Makasudin: Samar da bayani ga wannan kayan aikin gwaninta na kayan aiki • Jiki 10mm; 57 x 35 x 3 mm mai kwakwalwa • Braze shim • Fuskantar farin ciki

Zazzabi: 750 ° C (1382ºF)

Yawancin lokaci: 150 kHz

Kayan aiki DW-UHF-20KW tsarin zafin shigarwa, sanye take da tashar zafi mai nisa mai ɗauke da (2) 1.0 μF capacitors (na jimlar 0.5 μF) 4.5 Hannun shigarwar zafin jiki na XNUMX wanda aka tsara kuma aka haɓaka musamman don wannan aikace-aikacen.

Tsarin tsari: An tsaftace jiki da kuma carbide kuma sunyi tsaftacewa kamar yadda ake amfani da su a duk faɗin taron. An sanya sassan a cikin murfin shigarwa. Ana sanya suturar yumburai guda biyu tare da murfin da ke adawa da juna don rike da sassa a yayin hutawa. Hakanan an yarda da hawan a kan sassa don a bushe kafin dumama. Ana amfani da ikon yin amfani da wutar lantarki har sai gwanin yana gudana a cikin haɗin gwiwa.

Sakamako / Amfanin

• Tarwatsa dumama na haɗin gwiwa yana da kyau

• tsari ne mai ƙyamarwa ya fi daidai, sarrafawa

• Sakamako za'a iya haifuwa

Brazing Brass Pipe Tare da Induction

Brazing Brass Pipe Tare da Induction

Makasudin: An ƙera Block zuwa 1400 ° F don yin sulhu akan tube tarkon zuwa taro

Abubuwan: Rumbun tagulla da tsofaffin tubes sunyi amfani da su

Zazzabi: 1400 ºF (760 ° C)

Yawancin lokaci: 350 kHz

Kayan aiki DW-UHF-10KW shigar da wutar lantarki ciki har da • Mafuta: haɓaka-harshe na 2-juya-tsaren da aka tsara musamman • Ma'aikata: ya ƙunshi masu haɓaka 1.0μF biyu (0.5 μF duka)

Tsarin Tsarin sassan ƙarfe, gyaran kafa tsari da haruɗɗa suna tattare da kuma kasancewa a cikin sakonni na al'ada. An ƙaura ƙarancin haɗin gwiwa a cikin 45 seconds.

Sakamako / Amfanin

Tattalin Arziki: shigarwa kawai yana da kayan abu a cikin akwatin; babu makamashi da aka rushe wutar da ke kewaye da kayan aiki da iska; babu wuta ko kayan da ake buƙata don Kashewa Control: tsari yayi amfani da shi don yin amfani da tsofaffin siffofi; tsari sau da yawa wanda ya dace da aikin sarrafawa

Amfani: makamashi yana amfani ne kawai a yayin haɗin gwiwa

 

Ƙwanƙwan Gwanin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙwarar Ƙira

Ƙwanƙwan Gwanin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙwarar Ƙira

Makasudin: Yin ƙarfin ƙarfe da yawa da aka yi amfani da su a cikin ruwa

Zazzabi 1350 ° F 730 ° C

Yanayin 200 ko 280 kHz (dogara na dogara)

Kayan kayan aiki na DW-UHF-10KW shirin haɓakawa, maƙallin aiki mai nisa tare da maƙallan 1μF biyu da kuma maɓallin haske na 3

Tsarin aiki: Ana amfani da murhun mai amfani na uku da aka yi amfani da shi don rarraba wasu sassa da aka bayar. An haɗa sassan da nauyin haɗari da ƙafafun ƙarfe sannan kuma mai tsanani. Lokacin zafi yana bambanta daga sashi don rabu da manyan sassa ɗauke da minti kadan na 3, kuma ƙananan sassa sunyi zafi a ƙasa da 20 seconds. Bayan dafaffen sassa an kashe su.

Sakamako / Amfanin

Maimaitawa: ainihin ƙaddamarwar ƙararrawa yana ƙarfafa tsari wanda aka mayar da shi sosai.

Tattalin Arziki: tsari yana ba da izini don yin amfani da ƙwayar ƙarfin lantarki mafi girma fiye da tsari na wuta

=