Kwamitin Circuit na Soldering RF - Injin Injin Injin Injin

Ƙungiyar Shawarar Ƙwararrun Ƙwararrun RF tare da Ƙwararren Ƙwaƙwalwar Ƙasa

Manufa Gama taron kwamitin kewaye zuwa 600ºF (315.5ºC) don siyar da masu haɗa RF zuwa na'uran radar.
Kayan Kovar masu haɗi 0.100 "(2.54mm) mai faɗi x 0.200" (5.08mm) mai tsayi, allon kewaya da manna mashi
Zazzabi 600ºF (315.5ºC)
Yanayin 271 kHz
Kayan aiki • DW-UHF-2 kW tsarin dumama wuta, sanye take da matattarar matattarar aiki mai ɗauke da onearfin 1.2μF.
• coarfin zafin mai sanyawa wanda aka tsara kuma aka haɓaka musamman don wannan aikin.
Tsari Ana amfani da murfin mai juzu'i biyu don zafin taron. Ana amfani da manna mai narkewa zuwa yankin haɗin gwiwa, ana sanya masu haɗawa a wuri mai kyau kuma ana amfani da zafi na sakan 10, ƙirƙirar
da shingen manna don gudana.
Sakamako / Amfanin Induction dumama yana samarwa:
• Ya ƙirƙirar ruwa da gas mai haɗin gwiwa da sauri da kuma inganci
• Aikace-aikacen aikin zafi ba tare da shafar wasu yankunan jirgi ba
• heatingarfin hannu mara hannu wanda ba ya haɗa da ƙwarewar mai sarrafa kere kere
• Ko da rarraba dumama

Ƙungiyar Jirgin Ƙungiyar Induction Tare da IGBT tsarin shara

Manufa Don zafin post, jagora ko preform na siyar da kyauta don aikace-aikacen siyar da allon kewaya daban-daban.
Kayan aiki Allon zagaye na sama da na kasa, karami da babba ko kuma jagorantar gabatarwa kyauta.
Zazzabi <700 ºF (371ºC) ya dogara da preform da aka yi amfani da shi
Yanayin sauƙi na uku 364 kHz
Ƙananan maɓallin waya 400 kHz
Babban maɓallin waya 350 kHz
Kayan aiki • DW-UHF-4.5 kW tsarin dumama wuta, sanye take da matattarar matattarar aiki mai ɗauke da na'urori masu ƙarfin 0.66μF guda biyu don jimlar 1.32 μF
• ilarfin dumama yanayi, an tsara shi kuma an inganta shi musamman don wannan aikace-aikacen.
Tsari Ana amfani da keɓaɓɓun mutane guda uku don zafafa wurare daban-daban akan allon zagaye dangane da idan wurin aikace-aikace ɗaya ne ko aikace-aikacen rukuni. Lokaci ya bambanta daga 1.8 zuwa 7.5 sakan dangane da wuri. A cikin samarda tashoshi masu zafi da murɗa suna motsawa zuwa matsayi akan post don dalilai na aiki da kai. Ko dai ana amfani da preform din jagora ko jagora. Lokacin aiwatarwa akan mai siyar da kyauta kyauta ya ɗan tsayi.
Sakamako / Amfanin Induction dumama yana samarwa:
• heatingarfin wuta mara hannu wanda ba shi da ƙwarewar mai ba da sabis don ƙera abubuwa, yana ba da rance sosai ga aikin sarrafa kansa.
• Solder sarrafawa ta hanyar preforms, babu wucewar hagu a jirgin.
• Kyakkyawan maƙallin mai gudana ba tare da dumama allon ba da lalata lamuran da'irori da abubuwan da aka gyara.