induction karfe - induction machine manufacturer

Fa'idodin Ƙirƙirar Ƙarfe Mai Dumama Ƙarfe

Induction dumama takardar karfe tsari ne wanda ya ƙunshi amfani da filin lantarki don dumama wani ƙarfe. A wannan yanayin, abu shine takardar karfe. Ana sanya takardar ƙarfe a cikin filin lantarki, kuma makamashi daga filin yana sa karfe ya yi zafi. Wannan hanyar dumama tana da sauri… Karin bayani

Sakamakon Sashin Kayan Kayan Kayan Kayan Kayan Kayan Hotuna

Sashin Harkokin Kayan Wuta Mai Sanya Domin Ƙwararren Hotuna Tare da Gidan Hutun Nasihu na IGBT

Makasudin atingarfe sassan karfe zuwa 1900ºF (1038ºC) don aikace-aikacen taken zafi
Matakan sassan jiki tare da 7 / 16 "(11.11mm) OD da sashin yumbu
Zazzabi 1900 ºF (1038ºC)
Yanayin 440 kHz
Kayan aiki • DW-UHF-6kW tsarin dumama wuta, sanye take da matattarar matattarar aiki mai ɗauke da ƙarfin 0.66μF ɗaya.
• ilarfin dumama yanayi, an tsara shi kuma an inganta shi musamman don wannan aikace-aikacen.
Tsari Ana amfani da murfin mai juyi huɗu tare da saka yumbu don zafafa ɓangaren 0.75 ”(19mm) na ɓangaren zuwa 1900ºF (1038ºC) na sakan 7.5. Yumbu yumbu don haka sashin baya shigowa
tuntuɓa tare da murfin.
Sakamako / Amfanin Induction dumama yana samarwa:
• heatingarfin hannu mara hannu wanda ba ya haɗa da ƙwarewar mai sarrafa kere kere
• Aikace-aikace na zafi akan aikin aiki tare da daidaito da daidaito
• Ko da rarraba dumama
• Ƙananan matsa lamba da matsanancin ƙarfin raguwa

Fitar da Kayan Kayan Wuta Don cire Cire filastik

Ƙungiyar Wuta Kayan Gyara Don cire Cikar filastik tare da RF Rashin Kayan Gida

Manufa Maido da rufin polypropylene daga ramin bututun ƙarfe don ba da damar sake amfani da duka tubunan da rufin.
Abubuwan Wuraren Harsunan 1 / 8 "(0.318 cm) zuwa 5 / 8" (1.59 cm) ID
Rufin polypropylene mai karewa
Zazzabi 150 ºC (302 ° F)
Yanayin 185 kHz
Kayan aiki • DW-UHF-4.5kW tsarin dumama wuta, sanye take da matattarar matattarar aiki mai ɗauke da μ 1.5 μF capacitor
• coarfin zafin mai sanyawa wanda aka tsara kuma aka haɓaka musamman don wannan aikin.
Tsari / Labari Ana amfani da akwatin akwatin wasiƙa mai sau shida don zafin bututun ƙarfe na ciki. Rufin filastik ya yi laushi sosai don sauƙin cirewa da sake yin fa'ida. Lokacin da ake buƙata don narkar da filastik daga mita ɗaya na waya kusan 45 ne. Wannan ya bambanta dangane da diamita na bututun.
Sakamako / Amfanin Ƙarfafawa ta jiki shine kawai hanyar da za a iya cire takarda filastik,
bar shi a cikin wani nau'i na gurɓatacce don sake amfani. Hanya ce ta aiki da sauri kuma kuma tana ragewa a sawun ƙarancin kamfanin.

gyaran gyare-gyaren karfe

ctionarfafa ƙarfe ƙarfe baƙin ƙarfe na roba tare da ɗimbin ɗimamawa mai ɗimbin zafi

Manufa Don taɗa zafin simintin ƙarfe guda biyu wanda ba daidai ba wanda za'a tsara shi kuma a haɗa shi da roba mai roba
Kayan simintin karfe biyu, 17 lb. wanda aka sassaka shi da tsari, kusan 6 "(152mm) x 9" (229mm) x 1 "(25.4mm)
Zazzabi 400 ºF (204 ºC)
Yanayin 20 kHz
Kayan aiki • DW-MF-45kW tsarin zafin shigarwa, sanye take da matattarar aiki mai nisa mai ɗauke da na'urorin haɗi na 1.0 μF huɗu (don jimlar 1.0 μF)
• coarfin zafin mai sanyawa wanda aka tsara kuma aka haɓaka musamman don wannan aikin.
Tsari Ana yin simintin ƙarfe biyu na ƙarfe a kan faranti mai takaddama tare da makullin jagorar tagulla. Ana ajiye farantin a kan tebur wanda yake zamewa cikin babban kebul mai jujjuya-juyi mai yawa. Abubuwan sassan suna mai daɗaɗawa zuwa 400 ºF a cikin sakan 180. Lokacin jinkirin jinkiri yana bawa sassan damar zuwa zafin jiki daidai. Lokacin da aka kammala zagaye na dumama kowane ɓangare an sanya shi a cikin latsa don aikin gyare-gyare da haɗin aiki.
Sakamako / Amfanin Ƙarƙashin ƙarancin ƙwayar ƙarancin ƙarfe na kaya na karfe
samar:
• inganci da kuma zazzagewar zafi vs. wani fitil ko tanda.
• har ma da horon sassa a ko'ina
Ƙananan muryoyi mai yawa suna samar da:
• Sauƙaƙewa sauƙi da saukewa daga sassa
• sassauci don sauye-sauye masu girma da yawa da lissafi