induction aluminium mai ƙonawa - ƙirar injin ƙera wutar lantarki

Ƙunƙwasa Cutar Cikin Gidan Cutar Gumaman Aluminum

Ƙunƙwasa Cikakken Kayan Cikin Gudun Aluminum Tare da Ƙungiyar Rashin Ciki IGBT

Manufa: Don dumama bututun bututun ƙarfe na aluminium ya mutu zuwa sama da 2850F a cikin sakan 2 zuwa 5 don ƙirƙirar kayan catheter. A halin yanzu, ana yin dumama a cikin dakika 15 tare da tsofaffin kayan aikin shigar da abubuwa. Abokin ciniki yana son yin amfani da ingantattun kayan aikin shigar da yanayi don rage lokutan dumama da haɓaka ingantaccen tsari.
Abubuwan: Aluminum catheter tipping mutu yana aunawa 3/8 ″ OD da 2 ″ dogon tare da rigar nonmagnetic akan yankin zafi. An bayyana kayan catheter suna kama da filastik na polyurethane. Hakanan, an saka waya ta karfe mai tsawon diamita 0.035 into a cikin bututun catheter don hana faduwa.
Zazzabi: 5000F
Aikace-aikace: DW-UHF-4.5kW ingantaccen yanayin shigar da wutar lantarki an ƙaddara don samar da ingantaccen sakamako kamar haka:
Lokacin dumama na daƙiƙa 3.3 don isa 5000F da ƙirƙirar catheter an sami nasarar ta hanyar amfani da biyu (2) sama da biyu (2) juya keɓaɓɓen kebul.
An kirkiro catheter mai inganci ta latsa 1/2 ″ na bututun polyurethane a cikin sifar yayin riƙe hoto ta hanyar amfani da waya ta 0.035 to don hana durkushewar bututun.
Sakamakon dakunan gwaje-gwaje ya nuna cewa an sami raguwar lokaci mai yawa wanda zai ba da damar haɓaka ƙaruwa sosai a cikin samarwa yayin da ba sadaukar da inganci ba.
Kayan aiki: DW-UHF-4.5kW ingantaccen yanayin shigar da wutar lantarki ciki har da tashar zafi mai nisa mai ɗauke da ƙarfin (1) mai ƙarfin 1.2 μF.
Yawancin lokaci: 287 kHz

Ƙunƙwasa Cikin Kayan Gilashin Aluminum

Ƙunƙasa Cikakken Gilashin Aluminum don Ƙarshen Kashewa Tare da Kayan Wuta Mai Kyau

Manufa Ta hanyar dumama saman 2 ”(50.8mm) na tarkon iskar oxygen don ƙirƙirar ƙarshen zagaye tare da rami don bawul ɗin oxygen
Abubuwan Alkin iskar oxygen na oxygen tare da ƙarshen ƙarshen 2.25 "(57.15mm) diamita, 0.188" (4.8mm) kaurin bangon
Zazzabi 700 ºF (371 ºC)
Yanayin 71 kHz
Kayan aiki • DW-HF-45kW tsarin zafin shigarwa, sanye take da matattarar matattarar aiki mai ɗauke da itorsarafan 1.5μF biyu don jimlar 0.75μF
• coarfin zafin mai sanyawa wanda aka tsara kuma aka haɓaka musamman don wannan aikin.
Tsari Ana amfani da murfin mai juyi sau biyar don dumama ƙarshen buɗewar iskar oxygen. Tankin yayi zafi na dakika 24 don kaiwa 700 reachF (371 ºC).
Sakamako / Amfanin Induction dumama yana samarwa:
• Uniform ta hanyar dumama
• Yara, azaman ƙarfin makamashi
• Saurin, sarrafawa da kuma maimaitawa tsari
• heatingarfin hannu mara hannu wanda ba ya haɗa da ƙwarewar mai sarrafa kere kere

Ƙarƙasa Aluminum zuwa Tubbaran Turawa tare da Hanya

Ƙarƙasa Aluminum zuwa Tubbaran Turawa tare da Hanya

Makasudin: Domin ƙona wutar aluminum zuwa 1050 ºF (566 ºC) don aikace-aikace na brazing:

abu:

Cu bututu (3/4 ″ / 19mm)
Cu bututu (5/8 ″ / 15.8mm)
AI tubes (3/8 ″ /9.5mm)
AI da yawa (5/8 ″ /15.8mm)
AI da yawa (3/4 ″ /19mm)
Lucas-Milhaupt Neman 30-832 mai mahimmanci
Gidan waya

Zazzabi 1050 ºF (566 ºC)

Yanayin 260 kHz

Kayan kayan aiki DW-UHF-10KW 150-500 kHz shigar da wutar lantarki da aka ajiye tare da tashar wutar lantarki wanda ke dauke da masu amfani 1.5 μF biyu.

Hanyar da aka ba da wutar lantarki mai sauƙi biyu da aka tsara da kuma bunkasa musamman ga taron alummar
Hanyar da za a shigar da shi a cikin sau biyar mai kwakwalwa wanda aka tsara da kuma bunkasa musamman don ƙwanƙwasa tubunan Cu zuwa taron hadin gwiwa ta AI

Tsarin gyaran gyare-gyare: an tsara nau'i-nau'i kafin su dace da shamban aluminum. Daga nan sai aka sanya nau'ukan aluminum hudu a cikin mutane da dama kuma an saka taron a cikin akwatin. An yi tsanani da taron don kimanin 70 seconds, a daidai lokacin da ya kai ga zafin jiki da aka yi amfani da ita ya yi ta gudu. Ga kwandunan Cu, an shirya su ne don suyi, sun kasance a kusa da shambura, kuma an sanya taron a cikin akwatin. Lokacin sake zagayowar yanayin zafi yana kusan 100 seconds. Wasu kayan aikin da ake buƙata na yin amfani da itace don yin gyare-gyare don cika dukkanin sashin layi saboda ƙananan waya. Idan an kara tsawon lokacin sake zagayowar, za'a kawar da buƙatar tsayawar itace.

Sakamako / Amfanin: Tsaida, maimaitawa:

Abokin ciniki ya buƙaci madaidaici da maimaitaccen zafi fiye da tocilan da zai iya isar da shi, wanda haɓakawa ya sami damar cimmawa.
Maganin yanayin zafi: Induction yana ba da izini don kulawa da zafin jiki mafi girma idan aka kwatanta da wasu hanyoyi, ciki har da tayin, wanda abokin ciniki yake so