gyaran gyare-gyare

Ƙunƙwasa Carbide To Steel Tare da Ƙaddara

Ƙunƙwasa Carbide To Steel Tare da Ƙaddara 

Manufar: Yi amfani da kayan aiki tare da daidaituwa a cikin aikace-aikacen jirgin sama

abu:

• Maƙallan cabid

• Babbar ƙananan ƙananan shank

• Hasken yanayi yana nuna fenti

• Braze shim da baƙar fata

Zazzabi 1400 ° F (760 ° C)

Yanayin 252 kHz

Kayan kayan aiki na DW-UHF-10kw ƙwaƙwalwar ajiya, sanye take da tashar wutar lantarki wadda ke dauke da na'urorin 0.33 μF biyu (duka 0.66 μF).

Tsari Ana amfani da kebul mai juzu'i mai yawa. Sashin yana mai zafi don ƙayyade lokacin da ake buƙata don isa zafin jiki da ake buƙata da samfurin zafi da ake buƙata. Yana ɗaukar kimanin dakika 30 - 45 don isa 1400 ° F (760 ° C) dangane da girman ɓangarorin daban-daban. Ana amfani da ruwa a kan dukkan ɓangaren. Sandaƙƙarfan tagulla an sanya shi tsakanin ƙarfen shank da carbide. Ana amfani da wutar lantarki mai sanya wutar lantarki har sai tagulla ta gudana. Tare da tsawaitawa mai kyau, za a iya samun daidaiton ɓangaren.

Sakamako / Amfanin • Maimaitawa, daidaiccen zafin rana.

Brazing carbide shaft tare da sakawa

Brazing carbide shaft tare da sakawa

Makasudin: Gwada igiya mai ɗaukar motsi a tube

Abubuwan: Carbide shaft 1/8 ″ to 1 ″ diamita (masu girma dabam masu girma) Karfe bututu 3/8 ″ to 1 ¼ ”OD Azurfa mai siyar da braze

Temperatuur: nuna launin

Zazzabi: 1400 ° F don 60 seconds Frequency300 kHz

Kayan aiki: DW-UHF-6KW-III, 150-400 kHz ƙarfin tsarin gyaran wuta wanda aka haɗa da tashar wutar lantarki mai dauke da mahafan 0.66 μF (duka 1.32 μF)

Tsari: Ana amfani da mai siyar da azurfa zuwa inda shagon carbide da bututun ƙarfe suka hadu. Yankewa tsakanin sassan biyu yakai kimanin .0005 ″. Placedan ƙaramin takalmin katako mai walƙiya an sanya shi a kan sashi sannan kuma ɓangaren ya yi zafi. Yana ɗaukar kimanin daƙiƙa 60 don gudana braze tare da mafi kyawun ƙawancin zafi da kwararar mai. Kodayake sashin zai iya zama mai zafi da sauri, ana samun sakamako mafi kyau a cikin dakika 60.

Sakamako / Amfanin: Fitilar fanko yana samarwa, maɗaukakin zafi. Dole ne ake buƙatar da ake bukata zafi don yin amfani da ƙuƙwalwar ƙwallon ƙafa don ya tabbatar da haɗin gwiwa mai kyau.

Ƙungiyar Brazing Carbide

Fassara Farin Farin Cikakken Fayil

Manufa: Ƙungiyar Brazing carbide wallafe-wallafe-wallafe-wallafe tare da daidaitattun kayan aiki a cikin aikace-aikacen iska

Material • Gidan motsa jiki • Babbar ƙananan ƙananan shan ƙwayoyi • Yanayin zafi yana nuna fenti • Braze shim da baƙar fata

Zafin jiki 1400 ° F (760 ° C)

Frequency 550 kHz

Kayan aiki: DW-UHF-4.5kw ƙaddamar da tsarin tsawa, sanye take da tashar wutar lantarki wadda take dauke da na'urorin 0.33 μF biyu (duka 0.66 μF).

tsari Ana amfani da murfin mai juzu'i mai juzu'i da yawa. Sashin yana da zafi don ƙayyade lokacin da ake buƙata don isa zafin jiki da ake buƙata da samfurin zafi da ake buƙata. Yana ɗaukar kimanin dakika 30 - 45 don isa 1400 ° F (760 ° C) dangane da girman ɓangarorin daban-daban. Ana amfani da ruwa a kan dukkan ɓangaren. Sandaƙƙarfan tagulla yana yaƙe tsakanin ƙarfen shank da carbide. Ƙarfin wutar wuta Ana amfani da shi har sai gwanin yana gudana. Tare da daidaituwa, za a iya samun daidaituwa na bangare.

Sakamako / Amfanin • Maimaitawa, daidaiccen zafin rana.

 

=