Braft Brass bututu

shigowa brazing bututu na tagulla zuwa sashin farin ƙarfe

Manufa Babban Frequency Induction Brazing bututun ƙarfe zuwa ɓangaren tagulla da ƙaramin tagulla a ƙarƙashin minti ɗaya ta amfani da shigarwa. Kayan aiki DW-UHF-6KW-III na’urar brazing induction na hannu hannu 2 juya kayan aiki • Wide sashin tagulla • bututun tagulla • Gilashin takalmin gyaran azurfa, wanda abokin ciniki ya gwada 1 - Pipe zuwa babban bangare: Parfin Sigogi Mai Mahimmanci: 4.4… Karin bayani

Ƙwanƙwan Gwanin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙwarar Ƙira

Ƙwanƙwan Gwanin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙwarar Ƙira

Makasudin: Yin ƙarfin ƙarfe da yawa da aka yi amfani da su a cikin ruwa

Zazzabi 1350 ° F 730 ° C

Yanayin 200 ko 280 kHz (dogara na dogara)

Kayan kayan aiki na DW-UHF-10KW shirin haɓakawa, maƙallin aiki mai nisa tare da maƙallan 1μF biyu da kuma maɓallin haske na 3

Tsarin aiki: Ana amfani da murhun mai amfani na uku da aka yi amfani da shi don rarraba wasu sassa da aka bayar. An haɗa sassan da nauyin haɗari da ƙafafun ƙarfe sannan kuma mai tsanani. Lokacin zafi yana bambanta daga sashi don rabu da manyan sassa ɗauke da minti kadan na 3, kuma ƙananan sassa sunyi zafi a ƙasa da 20 seconds. Bayan dafaffen sassa an kashe su.

Sakamako / Amfanin

Maimaitawa: ainihin ƙaddamarwar ƙararrawa yana ƙarfafa tsari wanda aka mayar da shi sosai.

Tattalin Arziki: tsari yana ba da izini don yin amfani da ƙwayar ƙarfin lantarki mafi girma fiye da tsari na wuta

Brazing Copper Tube zuwa Brass Fitting Tare da Induction

Brazing Copper Tube zuwa Brass Fitting Tare da Induction 

Manufar: Don yin amfani da wutar lantarki don yin amfani da murfin jan ƙarfe ta hanyar amfani da na'urar da aka yi amfani da shi ta hanyar amfani da waya. Tsarin aiki zai faru ne a ƙarƙashin yanayi na Nitrogen da 4% Ginan gas. Daftarin gyare-gyare na gyaran fuska sun narke a 1190 ° F, amma sassan suna bukatar a kiyaye a karkashin 1300 ° F. Dole ne a sarrafa sassan a cikin nau'i na 175 zuwa 200 a kowace awa wadda ke fassara cikin 18 seconds na lokacin hutawa ta bangare.

Abun Tubing Tuban Copper Mai aunawa 0.5 ″ OD da 2 ″ Tsawon, ssarfafa tagulla, Braze Preform, Babu Fari.

Temperatuwan Sama da 1190 ° F amma ba za ta wuce 1300 ° F ba

Yawancin lokaci: 300 kHz

Kayan aiki: DW-UHF-10KW fitarwa mai karfi na ƙarfafa wutar lantarki tare da ƙananan nau'ikan (3) guda uku, ƙarfin (8) guda takwas (0.66) masu ƙaddamar da 10 μF, da kuma maɓallin alamar sauƙi huɗu. Tsarin Daftarin DW-UHF-XNUMXKW ya samar da wutar lantarki mai karfi tare da takamaiman alamar maɗaukaki guda huɗu da aka yi amfani da shi don cimma sakamakon da ya biyo baya.

Sakamako • An samo yanayi da aka buƙata a ƙarƙashin kwalba ta kwalba ta hanyar samar da 95% Nitrogen / 5% Hannun lantarki a cikin nauyin 25-30 cfh. • Hanya na zafin jiki na kawai 10 seconds ya zama dole don samun isasshen tsabtace ƙarancin wanda ya wuce iyakar da ake bukata na 18 seconds.

=