Abubuwan Braarfe zingan Katako na toasa zuwa Tungsten Carbide Plate
Manufa
Uararrawar uira ta ofarfafa Steelarin Karfe zuwa Tangsten Carbide Plate
Kayan aiki
DW-UHF-6KW-III abin sawa na bracing inji
Test 1
Materials
• Sandar karfe: 19.05 mm (0.75 ″) OD, 82.55 mm (3.25 ″) Tsawon
• Tungsten Carbide Plate: 38.1 mm (1.5 ″) OD, 10.16 mm (0.4 ″) Kauri
• Alloy: 19.05 mm (0.75 ″) Faya-fayan Brazing
Power: 4.0 kW
Zazzabi: Aƙalla kusan 760 ° C (1400 ° F)
lokaci: 40 sakan
Test 2
Materials
• Sandar karfe: 12.7 mm (0.50 ″) OD, 76.2 mm (3 ″) Tsawon
• Tungsten Carbide Plate: 19.05 mm (0.75 ″) OD, 6.35 mm (0.25 ″) Kauri
• Alloy: 12.7 mm (0.50 ″) Faya-fayan Brazing
Power: 2.36 kW
Zazzabi: Aƙalla kusan 760 ° C (1400 ° F)
lokaci: 23 sakan
Test 3
Materials
• Sandar karfe: 12.7 mm (0.50 ″) OD, 76.2 mm (3 ″) Tsawon
• Tungsten Carbide Plate: 1 ″ OD, 1.39mm (0.055 ″) Kauri
• Alloy: 12.7 mm (0.50 ″) Faya-fayan Brazing
Power: 2.36 kW
Zazzabi: Aƙalla kusan 760 ° C (1400 ° F)
lokaci: 20-25 sec (ulaukar kashewa ko kashewa)
Test 4
Materials
• Sandar karfe: 6.35 mm (0.25 ″) OD, 76.2 mm (3 ″) Tsawon
• Tungsten Carbide Plate: 21.08mm (0.83 ″) OD, 1.65mm (0.065 ″) kauri
• Alloy: 6.35 mm (0.25 ″) Faya-fayan Brazing
Power: 1.96 kW
Zazzabi: Aƙalla kusan 760 ° C (1400 ° F)
lokaci: 20 sec (Ana ɗorawa a kunne / kashe)
Sakamako da Karshe:
Bracing sassa daban-daban na karfe zuwa carbide diski yana yiwuwa tare da matsi mai shigowa guda daya. An tsara wutan ne ta kunna wuta da kashewa ta amfani da sauyawa a kafa don hana dumama cikin sassan carbide.