shigarwa Preheating aluminum flanges
description
shigarwa Preheating aluminum flanges
Manufa: Uunƙarar Cikakken aluminum taro don aikace-aikacen preheat.
Material : Fuskokin Almin (2.35 "ta 4.83" / 60 mm ta 133 mm) da (3.35 "da 6.91 / 85 mm da 176 mm)
Aluminum bututu (.63 "/ 16 mm OD) da kuma (.92" / 23mm OD)
Zazzabi: 600ºF/315ºC
Frequency: 150 kHz
Kayan Wuta Kayan Gyara
-DW-UHF-20kW tsarin yin amfani da wutar lantarki, sanye take da matattarar matattarar aiki mai ɗauke da capacitors biyu 1.5μF don jimlar .75 μF
- An ƙin murhun wuta tsara da kuma bunkasa musamman don wannan aikace-aikacen.
Tsarin Cutar ctionunƙwasawa:
Ana amfani da murfin mai jujjuya a kusa da ƙananan sassan, waɗanda aka riƙe a cikin abu yayin yayin da aka saka flange a cikin murfin. Partsananan sassan suna mai tsanani a cikin sakan 20 kuma sun isa zafin jiki da ake buƙata a yankin haɗin gwiwa.
Ana yin keɓaɓɓen keɓaɓɓen littafi don dumama babban taron aluminum, wanda ke buƙatar irin zazzabin da ake so. Da
murfin yana zafin babban taron tare da daidaitawar samar da wutar lantarki iri ɗaya, amma yana buƙatar ƙarin kuzari. Wannan taron shine
mai zafi na dakika 20 kuma ya kai zafin da ake so.
Bayani
An sanya maɗaurar rubutu guda biyu a ƙarƙashin bakin kowane ɓangaren. Ana buƙatar wannan don jiƙa zafi a cikin cikin ɓangarorin biyu.
Sakamako / Amfanin Induction dumama yana samarwa:
-Haƙƙarfan ƙarshen ƙarshen samfurin vs. ta amfani da wutar wuta mai buɗe wuta. Tanda suna kula da yanayin zafin yanayi da bambancin zafi kuma yakan haifar da sakamako mara kyau
- Ko rarraba dumama
- Sauri, tsaftataccen zafi don lokutan sake zagayowar sauri
