Taskar Fasahar Fasaha - Shafi na 25 daga cikin 35 - mai kera injin dumama

Ƙunƙwasa Cikin Kayan Kwafa Catheter Tip

Ƙunƙwasa Cutar Cutar Girasar Ƙirar Ƙira Tare da IGBT Ƙungiyar Yankewa ta Kyau

Manufa atara ƙwanƙarar ƙarfe mai sanyaya ruwa zuwa 700 ° F (371ºC) don ƙirƙirar ƙirar Teflon catheter mai inganci.
Kayan kayan Teflon na katako, ƙungiyar taro
Zazzabi 600-700 ° F (315-371ºC)
Yanayin 376 kHz
Kayan aiki • DW-UHF-6 kW tsarin dumama wuta, sanye take da matattarar matattarar aiki mai ɗauke da onearfin 0.66μF.
• coarfin zafin mai sanyawa wanda aka tsara kuma aka haɓaka musamman don wannan aikin.
Tsari Ana amfani da murfin juyawa biyu don zafin murfin ƙarfe zuwa 660ºF (371ºC) a cikin sakan 2.7. Don ƙirƙirar tip na catheter, ana amfani da ikon RF yayin ɗauke catheter ɗin a kan madarar. Daga nan sai a tura tubing din zuwa ga sandar don samar da daidaito, har ma da tip.
Sakamako / Amfanin Induction dumama yana samarwa:
• Ƙaddara, aikace-aikacen zazzagewa na zafi
• Ƙararrawa marar lamba
• Saurin yanayi mai sauri

Ƙunƙwasa Cutar Cikin Gidan Cutar Gumaman Aluminum

Ƙunƙwasa Cikakken Kayan Cikin Gudun Aluminum Tare da Ƙungiyar Rashin Ciki IGBT

Manufa: Don dumama bututun bututun ƙarfe na aluminium ya mutu zuwa sama da 2850F a cikin sakan 2 zuwa 5 don ƙirƙirar kayan catheter. A halin yanzu, ana yin dumama a cikin dakika 15 tare da tsofaffin kayan aikin shigar da abubuwa. Abokin ciniki yana son yin amfani da ingantattun kayan aikin shigar da yanayi don rage lokutan dumama da haɓaka ingantaccen tsari.
Abubuwan: Aluminum catheter tipping mutu yana aunawa 3/8 ″ OD da 2 ″ dogon tare da rigar nonmagnetic akan yankin zafi. An bayyana kayan catheter suna kama da filastik na polyurethane. Hakanan, an saka waya ta karfe mai tsawon diamita 0.035 into a cikin bututun catheter don hana faduwa.
Zazzabi: 5000F
Aikace-aikace: DW-UHF-4.5kW ingantaccen yanayin shigar da wutar lantarki an ƙaddara don samar da ingantaccen sakamako kamar haka:
Lokacin dumama na daƙiƙa 3.3 don isa 5000F da ƙirƙirar catheter an sami nasarar ta hanyar amfani da biyu (2) sama da biyu (2) juya keɓaɓɓen kebul.
An kirkiro catheter mai inganci ta latsa 1/2 ″ na bututun polyurethane a cikin sifar yayin riƙe hoto ta hanyar amfani da waya ta 0.035 to don hana durkushewar bututun.
Sakamakon dakunan gwaje-gwaje ya nuna cewa an sami raguwar lokaci mai yawa wanda zai ba da damar haɓaka ƙaruwa sosai a cikin samarwa yayin da ba sadaukar da inganci ba.
Kayan aiki: DW-UHF-4.5kW ingantaccen yanayin shigar da wutar lantarki ciki har da tashar zafi mai nisa mai ɗauke da ƙarfin (1) mai ƙarfin 1.2 μF.
Yawancin lokaci: 287 kHz

Ƙarƙashin Ƙarƙashin Maɗaukaki

Ƙunƙwasa Ƙarƙashin Ƙunƙwasawa Tare da Ƙungiyar Harkokin Cutar IGBT na IGBT

Manufar Soladdamar da iyakokin fuse guda uku a lokaci guda don sake buɗe mai sayarda mai kyauta kuma sanya haɗin gwiwa tsakanin fis din fis da jagorar wayar waya
Abubuwan da aka lasafta ƙafafun ƙarshen jan ƙarfe 0.375 "(9.5mm) OD x 0.375" (9.5mm) tsayi, yumbu fis firam 1.5 "tsayi (38.1mm)
Zazzabi 700 ºF (371 ºC)
Yanayin 286 kHz
Kayan aiki • DW-UHF-20 kW tsarin dumama wuta, sanye take da matattarar matattarar aiki mai ɗauke da ƙarfin 1.0itorsF biyu don jimlar 0.5μF
• coarfin zafin mai sanyawa wanda aka tsara kuma aka haɓaka musamman don wannan aikin.
Tsari Ana amfani da matsayi uku don juye juzu'i mai jujjuya guda uku don siyar da manyan filaye guda uku lokaci guda. Ana sanya majalisun fius a cikin murfin kuma ana amfani da zafin a cikin zagaye uku a cikin sakan 3.5 a kowane zagaye don sake buɗe mai sayarwa. A kan layin samarwa an fara siyar da murfin ƙasa. Fusfunan suna cike da yashi kuma ba tare da jujjuya taron ba an siyar da saman murfin.
Sakamako / Amfanin Induction dumama yana samarwa:
• Sakamakon, sakamakon maimaitawa
• Daidaitaccen & cikakken aikin zafi
• heatingarfin hannu mara hannu wanda ba ya haɗa da ƙwarewar mai sarrafa kere kere
• Ko da rarraba dumama

Ƙungiyar Taimakon Ƙera Maɗaukaki

Ƙungiyar Ƙwararren Ƙwararren Ƙwararraki A Ƙungiyar Wuta Tare da Gidan Wuta na IGBT

Manufa Mai hadewa da tagulla guda uku daya bayan daya a cikin akwatin mahaɗar panel ba tare da shafi abubuwan da ke cikin akwatin mahaɗan ba
Abubuwan Lurarren Wutan Lantarki na rukuni, masu haɗin gwaninta, waya mai laushi
Zazzabi 700 ºF (371 ºC)
Yanayin 344 kHz
Kayan aiki • DW-UHF-6 kW tsarin dumama wuta, sanye take da matattarar aiki mai nisa mai ɗauke da 1.0 capacitor XNUMX oneF.
• coarfin zafin mai sanyawa wanda aka tsara kuma aka haɓaka musamman don wannan aikin.
Tsari Ana amfani da keɓaɓɓen keɓaɓɓen siffar mai ado iri uku don zafin mahaɗin. An sanya wani sarkar mai waya akan yankin haɗin gwiwa kuma kowane haɗin yana zafinsa daban na 5 seconds don siyar da mahaɗin. Jimlar lokacin aiwatarwa shine sakan 15 don haɗin haɗin uku.
Sakamako / Amfanin Induction dumama yana samarwa:
• Tabbatar da daidaito ya sadar da dumama kawai ga haɗin gwiwa; baya shafar abubuwan da ke kewaye da su
• Wutan da aka gano yana samar da tsabta da tsabta
• Ya samar da babban inganci, sakamakon maimaitawa
• Ko da rarraba dumama

Ƙunƙarar Ƙarƙashin Ƙungiya

Ƙunƙarar Ƙarƙashin Ƙarƙashin Ƙasa Tare da Ƙunƙasa Ƙunƙwasa

Manufa derarfafa murfin ƙarfe na nickel wanda aka saka baƙin ƙarfe EMI matatar gida ba tare da lalata layin RF ba
Abun 2 "x 2" (50.8mm) murfin bakin karfe, 2 "x 2" (50.8mm)
Zazzabi 573 ºF (300 ºC)
Yanayin 229 kHz
Kayan aiki • DW-UHF-3 kW tsarin dumama wuta, sanye take da matattarar matattarar aiki mai ɗauke da ƙarfin 1.2itorsF biyu don jimlar 2.4μF
• coarfin zafin mai sanyawa wanda aka tsara kuma aka haɓaka musamman don wannan aikin.
Tsari Ana amfani da murfin mai juzu'i guda murabba'i don siyar da murfin zuwa akwatin matattarar. Ana amfani da Solanƙarar Solder a akwatin matattarar kuma ana sanya juzu'i biyu (preform) suna rufe kewaye da murfin. An sanya taron a ƙarƙashin murfin kuma ana amfani da wutar don dakika 7 don siyar ɗin ɗin.
Sakamako / Amfanin Induction dumama yana samarwa:
• heatingarfin hannu mara hannu wanda ba ya haɗa da ƙwarewar mai sarrafa kere kere
• Maimaitawa, maras sadarwa marar tsabta
• Tsakanin tsabta
• Kyakkyawan aikin siyarwa ba tare da zafin kwalin da lalata layukan RF ba.
• Ko da rarraba dumama

RF Soldering Circuit Board

Ƙungiyar Shawarar Ƙwararrun Ƙwararrun RF tare da Ƙwararren Ƙwaƙwalwar Ƙasa

Manufa Gama taron kwamitin kewaye zuwa 600ºF (315.5ºC) don siyar da masu haɗa RF zuwa na'uran radar.
Kayan Kovar masu haɗi 0.100 "(2.54mm) mai faɗi x 0.200" (5.08mm) mai tsayi, allon kewaya da manna mashi
Zazzabi 600ºF (315.5ºC)
Yanayin 271 kHz
Kayan aiki • DW-UHF-2 kW tsarin dumama wuta, sanye take da matattarar matattarar aiki mai ɗauke da onearfin 1.2μF.
• coarfin zafin mai sanyawa wanda aka tsara kuma aka haɓaka musamman don wannan aikin.
Tsari Ana amfani da murfin mai juzu'i biyu don zafin taron. Ana amfani da manna mai narkewa zuwa yankin haɗin gwiwa, ana sanya masu haɗawa a wuri mai kyau kuma ana amfani da zafi na sakan 10, ƙirƙirar
da shingen manna don gudana.
Sakamako / Amfanin Induction dumama yana samarwa:
• Ya ƙirƙirar ruwa da gas mai haɗin gwiwa da sauri da kuma inganci
• Aikace-aikacen aikin zafi ba tare da shafar wasu yankunan jirgi ba
• heatingarfin hannu mara hannu wanda ba ya haɗa da ƙwarewar mai sarrafa kere kere
• Ko da rarraba dumama

Ƙunƙwasa Ƙarƙashin Ƙarƙwarar Wuta

Ƙunƙarar Ƙunƙarar Ƙwararraki Ta Yarda Da Ƙungiyar Cutar Ƙungiyar IGBT

Manufa Solara wayoyin jan karfe biyu zuwa pre-shigar turrets a kan sandar jan ƙarfe
Kayan Solder ya tsoma sandar sandar / nickel buss, 2 wayayyun igiyoyin jan jan ƙarfe, sandar brazing
Zazzabi 446 ºF (230 ºC)
Yanayin 230 kHz
Kayan aiki • DW-UHF-6kW tsarin dumama wuta, sanye take da matattarar matattarar aiki mai ɗauke da ƙarfin 1.2μF ɗaya.
• coarfin zafin mai sanyawa wanda aka tsara kuma aka haɓaka musamman don wannan aikin.
Tsari Ana amfani da keɓaɓɓen keɓaɓɓen juzu'i huɗu don siyar da sandar sandar buss. Ana amfani da wayoyin jan ƙarfe 2 a kan turrets kuma ana amfani da wuta na dakika 30. Ana ciyar da sandar sandar hannu ta hannu zuwa sassan mai zafi kuma takalmin yadin yana gudana daidai, ƙirƙirar haɗin.
Sakamako / Amfanin Induction dumama yana samarwa:
• Rage lokaci mai sulhuntawa
• Ko da rarraba dumama
• Haɗin gwiwa don daidaituwa tare

Ƙunƙwasawa Ƙarfafa Gidajen Aluminum

Ƙunƙwasawa Ƙarƙashin Gidajen Aluminum tare da Ƙungiyoyin Ƙunƙwasa na Ƙungiyar IGBT

Manufa Gumi gidan haske na almini don siyar da taron LED zuwa asalin ciki
Gida mai haske tare da toshe jan ƙarfe, gidan haskoki na aluminum 5 "(127mm) dia a saman, 1.25" (31.75mm) dia a gindi, fenti yana jin zafin fenti
Zazzabi 500 ºF (260 ºC)
Yanayin 45 kHz
Kayan aiki • DW-UHF-45kW tsarin dumama wuta, sanye take da matattarar matattarar aiki mai ɗauke da ƙarfin 1.0μF ɗaya.
• coarfin zafin mai sanyawa wanda aka tsara kuma aka haɓaka musamman don wannan aikin.
Tsari Ana amfani da murfin pancake mai yawa don dumama ƙasan gidan haskoki na aluminum. Babu gidan LED don haka ana yin wannan aikace-aikacen da fenti mai zafin jiki don tantance yuwuwar. Ana amfani da fenti mai auna zafin jiki inda gidan LED ke zaune a tsakiyar
gidajen haskakawa. Tushen gidan ya kai 500 ºF (260 ºC) a cikin sakan 30.
Sakamako / Amfanin Induction dumama yana samarwa:
• heatingarfin hannu mara hannu wanda ba ya haɗa da ƙwarewar mai sarrafa kere kere
• Saurin lokaci samar, karin makamashi
• Sakamakon, sakamakon maimaitawa
• Ko da rarraba dumama

Ƙunƙwasawa Ƙunƙarar Ƙunƙasa Don Waya

Ƙunƙwasawa Ƙinƙarar Ƙunƙasa don Waya Tare da IGBT Ƙunƙwasa Ƙungiyar Yanki

Manufa Heat Bakin ƙarfe mai haɗin ƙarfe don aikace-aikacen siyarwa a cikin masana'antar kerar waya
Kayan Bakin karfe mai haɗa 1.57 "(40mm) mai tsayi, 0.6" (15mm) OD & 0.4 "(10mm) mai kauri. Mai sayarda kyauta
Zazzabi 392 ºF (200 ºC)
Yanayin 352 kHz
Kayan aiki • DW-UHF-6kW tsarin dumama wuta, sanye take da shugaban aiki na nesa mai dauke da 1 μF capacitor.
• coarfin zafin mai sanyawa wanda aka tsara kuma aka haɓaka musamman don wannan aikin.
Tsari Ana amfani da murfin tashar juzu'i guda biyu don siyar da mai haɗawa zuwa kayan aikin waya. Ana saka mahaɗin bakin ƙarfe da kayan ɗamara waya a cikin murfin na tsawon daƙiƙa 20 don mai sayarwar ta
cika kawai saman mai haɗawa.
Sakamako / Amfanin Induction dumama yana samarwa:
• Ta hanyar dumama ƙarfe, shroud ɗin filastik ba shi da zafi kai tsaye
• Rage yawan farashi
• Saurin lokaci tsari, rage yawan kuɗi
• heatingarfin hannu mara hannu wanda ba ya haɗa da ƙwarewar mai sarrafa kere kere
• Ko da rarraba dumama

Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙwarar Ƙulla Gwaji

Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙwarar Ƙarƙwarar Ƙwararraɗi Tare da Kayan Gwaninta na IGBT

Manufa Don zafafa tagulla da tagulla don siyar da aikace-aikace akan kayan aikin likitanci
Zoben Brass, zoben tagulla da na jan ƙarfe 5.11 ”(130mm) mai tsayi, 4.3” (110mm) OD & 0.3 ”(7mm) a wuri mafi ƙanƙanci da zoben solder
Zazzabi 392 ºF (200 ºC)
Yanayin 306 kHz
Kayan aiki • DW-UHF-10 kW tsarin dumama wuta, sanye take da matattarar matattarar aiki mai ɗauke da ƙarfin 0.33itorsF biyu don jimlar 0.66μF
• coarfin zafin mai sanyawa wanda aka tsara kuma aka haɓaka musamman don wannan aikin.
Tsari Wannan aikin an kammala shi a matakai biyu waɗanda suke amfani da murfin mai juzu'i na 3. Tsarin farko shi ne siyar da zoben tagulla zuwa guntun tagulla wanda ya ɗauki sakan 85. Mataki na biyu shine siyar da babban tagulla ga taron farko. Wannan aikin yana ɗaukar sakan 50 don jimlar aiwatarwar minti biyu da sakan 15.
Sakamako / Amfanin Induction dumama yana samarwa:
• heatingarfin hannu mara hannu wanda ba ya haɗa da ƙwarewar mai sarrafa kere kere
• Ko da rarraba dumama
• Saurin lokaci tsari, tsari na yanzu yana ɗaukar minti 5
• Daidaitawa ta yin amfani da zoben sulɓi