Taskar Fasahar Fasaha - Shafi na 24 daga cikin 35 - mai kera injin dumama

Gudun Fit Fitar Kayan Gidan Jirgin Kaya

Kashe Fitar Fitar Kayan Gidan Fitar Kayan Gaya Tare Da Ƙungiyar Yanke Ƙunƙasa Mai Sauƙi

Manufa Yi zafi da ƙarar ƙarfe mai ƙaran ƙarfe don ƙyamar dacewa da ƙirar motar gear. Wannan wani bangare ne na kujerar nakasassu.
Kayan Karfe 2.5 "(63.5mm) OD, .75" (19mm) ID x .625 "(16mm) mai kauri, zazzabi mai nuna fenti
Zazzabi 400 ºF (204 ºC)
Yanayin 300 kHz
Kayan aiki • DW-UHF-3.2 kW tsarin dumama wuta, sanye take da matattarar matattarar aiki mai ɗauke da itorsara wutar lantarki 0.66 twoF guda biyu don jimlar 1.32 μF
• coarfin zafin mai sanyawa wanda aka tsara kuma aka haɓaka musamman don wannan aikin.
Tsarin Wata hanyar yin amfani da shi na biyun da ke cikin Littafi Mai Tsarki na amfani da ita don shayar da ginin.
An saka murfin a cikin giyar gear kuma ana amfani da wutar don dakika 90 don isa 400 reachF da ake buƙata (204 ºC) da faɗaɗa
giya ta haifa. Daga nan sai a sanya gear a kan shaft kuma a bar shi yayi sanyi, yana haifar da ƙanƙantar dacewa tsakanin matatar da
da shaft.
Sakamako / Amfanin Induction dumama yana samarwa:
• Babu lokacin sake zagayowar zafi, ana samun zafi a kan buƙata
• Energyarfin makamashi, sashi ne kawai, ba yanayin da ke kewaye da shi ba
• Sarrafa, ko da rarraba dumama
• Saurin lokaci samarwa

Ƙunƙwasa Kashe Fitar Carbide Ring

Ƙunƙwasa Rashin Fitattun Ƙungiyar Carbide Tare Da Ƙungiyar Kulawa na Ƙungiyar IGBT

Manufar Kishiya tana dacewa da zoben motar murya a cikin wani wurin shagon na karfe
Abun Kujerar Bawul Karfe 6 "(152.4mm) OD tare da 3" (76.2mm) ID ɗin rami & .75 "(19mm) mai kauri, zoben carbide
Zazzabi 500 ºF (260 ºC)
Yanayin 85 kHz
Kayan aiki • DW-HF-15kW tsarin dumama wuta, sanye take da matattarar matattarar aiki mai ɗauke da itorsan wuta biyu na 0.50 μF don jimlar 0.25 μF
• coarfin zafin mai sanyawa wanda aka tsara kuma aka haɓaka musamman don wannan aikin.
Aiwatarwa Ana amfani da maɓallin alamar sau uku da aka yi amfani da shi don shafe wurin zama na kwandon fata.
An sanya kujerun bawul ɗin ƙarfe a cikin murfin kuma an zafafa shi na daƙiƙa 50 don faɗaɗa ramin tsakiya & sauke zoben carbide a ciki
don yin amfani da tsarin dacewa.
Sakamako / Amfanin Induction dumama yana samarwa:
• Sakamakon daidaito da maimaitawa
• Saurin haɗin shiga cikin layi na samarwa
• Energyarfin makamashi, kawai ya zafafa sashin, ba yanayin da ke kewaye da shi ba
• heatingarfin hannu mara hannu wanda ba ya haɗa da ƙwarewar mai sarrafa kere kere
• Ko da rarraba dumama

Ƙunƙwasa Gudun Fitarwa Fitar Aluminum Shaft

Ƙunƙwasa Gyara Fitar Aluminum Shaft tare da tsarin IGBT na shigarwa

Manufofin Hearan ruwan zafin mai jan ƙarfe zuwa 200 ºF (93 ºC) kuma ya ja da baya zuwa kan shaft.
Abubuwan ruwan wukake na Aluminum tare da .28 ”(7.109mm) bore, aluminum shaft
Zazzabi 200 ºF (93 ºC)
Yanayin 255 kHz
Kayan aiki • DW-UHF-6W tsarin zafin shigarwa, sanye take da matattarar aiki mai nisa mai ɗauke da μaramar 1.0μF.
• coarfin zafin mai sanyawa wanda aka tsara kuma aka haɓaka musamman don wannan aikin.
Tsari Ana amfani da keɓaɓɓen kayan jujjuya littattafai guda biyu don ɗaure zafi a buɗe a kan ruwan wutan. Blaarfin zafin ya zafafa na dakika 20 don kaiwa 200 ºF (93 ºC). Ana cire ruwan wukake daga murfin & zamewa akan shaft don kammala aikace-aikacen dacewa da ƙyama.
Sakamako / Amfanin Induction dumama yana samarwa:
• Sakamakon maimaitawa
• Rage lokaci mai zagaye, ƙananan kayan kuɗi
• Ko da rarraba dumama

Ƙarar ƙyama ta Inductioin Fitting Aluminum Pulley

Tsuntsin ƙyama na Inductioin Fitting Aluminum Pulley Tare da Ƙungiyar IGBT

Manufa aluminumarar aluminium don saka jigilar ciki don masana'antar kera motoci
Kayan Aluminum Pulley 2.3 "(60mm) OD x 1.6" (40mm) ID x 1 "(27mm) mai girma da ciki dauke 0.7" (17.8mm) high x 1.6 "(40mm) dia
Zazzabi 464 ºF (240 ºC)
Yanayin 283 kHz
Kayan aiki • DW-UHF-4.5kW tsarin dumama wuta, sanye take da matattarar matattarar aiki mai ɗauke da ƙarfin 0.33itorsF biyu don jimlar 0.66μF
• coarfin zafin mai sanyawa wanda aka tsara kuma aka haɓaka musamman don wannan aikin.
Tsarin Aiki mai amfani da sau uku yana amfani da shi don zafi da kayan lambu.
Harshen ya dumi zuwa 464 ºF (240 ºC) a cikin sakan 20 don fadada diamita na ciki sannan kuma an saka ɗaukar ciki don samar da ɓangaren da aka kammala.
Sakamako / Amfanin Induction dumama yana samarwa:
• Magana da sarrafawa mai zafi
• Aikace-aikacen da aka sauƙaƙe a cikin tsarin da aka sarrafa
• Ko da rarraba dumama

Kashe Fitarwa Tattara Rods

Ƙunƙwasa Gyara Fitarwa Tattara Ƙungiyar Haɗuwa Tare da Ƙunƙunin Ƙungiyar IGBT

Manufa Tattara sandunan haɗi tare da madaidaicin iko na zafi
Kayan Rod yana da OD na .9125 "(23.18mm), dunƙule yana da ID na .9125" (23.18mm) tare da tsangwama na .0001 "(.0025mm). Nuungiyar ƙwanƙwasa ta ƙarfe ce
Zazzabi 400 ºF (204 ºC)
Yanayin 210 kHz
Kayan aiki • DW-UHF- 3.5 kW tsarin dumama wuta, sanye take da matattarar matattarar aiki mai ɗauke da na'urori masu ƙarfin 1.0μF guda biyu don jimlar 0.5 μF
• ilarfin dumama yanayi, an tsara shi kuma an inganta shi musamman don wannan aikace-aikacen.
Tsari Ana amfani da murfin mai juyi shida don zana sandar haɗawa na dakika 13. Kullin yana da alaƙa da igiyar rijiyar don haɓaka ko da dumamawa a kewayen. Ana haɗa sandar haɗawa tare da fisit ɗin don ƙarancin dacewa.
Sakamako / Amfanin Induction dumama yana samarwa:
• accuratearin cikakken iko na zafi vs mai ƙona wuta. Hearfin gwiwa ne kawai, ba duka ɓangaren ba.
• Ƙananan zafin jiki da ake amfani da su don hana discoloring.
• productara yawan aiki saboda maimaici da sauƙin aiki. Ana amfani da feda & ƙidayar lokaci.
• Babu samfur samfur.

Ƙungiyar Gyara Fitattun Ƙungiya

Manufa Don amfani da shigarwar don shirya majalisun ƙarfe don rage haɗuwar jama'a
Abun Abokin ciniki ya ba da kayan gyare-gyaren baƙin ƙarfe iri iri
Zazzabi 450 ºF (232 ° C)
Lokacin Tsarin lokaci 20 seconds
Yanayin 148 kHz
Kayan aiki DW-UHF-5.0 kW, 150-400 kHz tsayayyen tsarin shigar da yanayin dumama yanayi, sanye take da tashar zafi mai nisa wacce ke ɗauke da mahimmin 1.0μF
Ilarfin zafin mai sanyawa an tsara shi kuma an haɓaka musamman don wannan aikace-aikacen.
Tsarin Aiki mai juya juzu'i huɗu yana zoben zobe a ƙarshen ƙarshen taron. An tsara murfin don tattara filin zuwa tsakiyar taron inda yanayin zafin ya fi girma.
A ko'ina cikin zoben mai zafi, murfin yana gabatar da filin wuta. Bayan dumama, an sanya fil a cikin zobe kuma taron yana ruwa da ruwa.
Lokacin zafi ya banbanta daga sashi zuwa sashi amma bai wuce dakika 20 ba.
Sakamako / Amfanin Ƙarƙashin ƙarancin yana ƙosar da bukatun wannan tsari don:
• madaidaicin sakin jiki
• sassauci ga sassa na geometries dabam dabam
• mutum, jerin ɓangaren sashi, dace da aikin kai
• tushen tsabta na zafi
• ko da rarrabawar zafi

Kashe Kayan Kayan Kayan Kayan Kayan Wuta Camshaft

Rashin Kayan Kayan Kayan Kayan Kayan Kayan Kayan Gizon Kayan Wuta da IURT Gilasar Induction

Manufa: Cutar da kayan aiki na kamshaft tare da huda girman 1.630 ″ don taƙaita dacewa da ƙirar ƙarfe wanda ke da diamita na 1.632 ″. Ana buƙatar zazzabi na 5000F don kaya don faɗaɗa 0.002 ″ domin zamewa a kan shaft. A halin yanzu ana yin ƙira a ƙimar 15-20 a kowane sa'a 24 da aka sauya ta hanyar dumama kaya
a kan farantin zafi. Gilashin zafi mai zafi yana da tsawon kusan minti 45.
Abokin ciniki yana son bincika zaɓuɓɓukan da ake da su dangane da lokacin zafi da girman inji.
Abubuwan: Karfe Camshaft Gear mai auna 7 ″ a diamita, 1 ″ kauri, tare da huda girman 1.630 ″.
Zazzabi: 5000F
Aikace-aikace: Na musamman guda uku (3) sun juya murfin littafi tare da wasu kayan DAWEI masu karfin samarda wutar lantarki ana amfani dasu don cimma wadannan sakamakon:
- 5000F an kai shi cikin mintuna uku (3) yayin amfani da DW-HF 5, 5 kW fitarwa mai ƙarfin samar da wutar lantarki mai ƙarfi.
- 5000F an kai shi cikin biyar (5), takwas (8), da goma (10) mintuna ta amfani da DW-HF-3, 5 kW fitarwa mai ƙarfi yanayin shigar da wutar lantarki.
- Ko da an lura da dumama sakamakon kebul na uku (3) jujjuyawar kebul.
Kayan aiki: DW-HF-35 da DW-HF-55 kW suna samar da ingantaccen yanayin shigar da wutar lantarki bi da bi, gami da tashoshin zafi masu nisa da keɓaɓɓen keɓaɓɓen murfin mai juzu'i wanda aka yi daga 3/16 tub tubing na jan ƙarfe kuma yana da 4.4 ″ a cikin diamita.
Yawancin lokaci: 62 kHz

Ƙunƙwasawa Guda Fitarwa Don Abun daji

Ƙunƙwasa Gyara Fitarwa Don Abun daji tare da IGBT Sauya Fitar wasan kwaikwayo

Manufa: Don zafin gidan famfo na mai mai auna 8 ″ x 4 1/2 ″ x 3 1/2 ″ zuwa 3750F, yana ba da damar saka sassan karfe. A halin yanzu gidajen suna da zafi fiye da awa ɗaya a cikin tanda mai ɗaukar wuta. Yankunan da zasu saka sassan karfe sun auna 1.5 ″ da 0.6875 ″ a diamita. Bugu da kari, tsarin sakawa yana dauke da dan mintuna kadan, saboda haka ya kamata a kiyaye 3750F don a
lokaci don kammala aikin.
Abubuwan: Ginin Gidan Aluminum na auna 8 ″ x 4 1/2 ″ x 3 1/2 ″
Fitar da sassan sassa.
Zazzabi: 3750F
Aikace-aikacen: Ta amfani da DW-HF- 25, 25 kW fitarwa mai ƙarfi na ƙarfin shigar da wutar lantarki an sami sakamako masu zuwa.
- An kai 3750F a cikin minti ɗaya (1) don ba da damar sakawa.
- Gidaje 20 sunyi nasarar zafafa ta amfani da murfin fanke na kwanon dama biyar (5).
Kayan aiki: Amerm lokacin da SP 25, 25 kW ya fitar da ingantaccen yanayin shigar da wutar lantarki ciki har da tashar (1) mai nisa mai dauke da masu karfin guda hudu (4) wadanda suka hada da 1.0 μF, da kuma biyar (5) juya madaidaiciyar murfin pancake wanda aka yi daga 3/16 ″ jan karfe bututu.
Yawancin lokaci: 80 kHz

Kulle Kashe Fitattun Fitarwa

Ƙungiyar Rashin Fitarwa na Fitarwa tare da IGBT Yanke Ƙungiyar

Makasudin Cutar da bututun ƙarfe zuwa 500-1000 ° F don aikace-aikacen ƙyama. Ayyade fadada (ci gaba) na ID a yanayin yanayin yanayi daban-daban.
Abincin Matsi na 7 "OD x 4.75" ID x 5 "Yankin zafi
Rubuta 'K' thermocouple don auna yawan zafin jiki
Wutan lantarki
Zazzabi 500, 800, 1000 ° F (260, 427, 538 ° C)
Yanayin 66 kHz
Kayan aiki DW-HF-7.5, 7.5 kW, 150-400 kHz samar da wutar lantarki, sanye take da tashar zafi mai nisa mai ɗauke da itorsan wuta 1.5 μF biyu (na jimlar 0.75 μF)
Hanyar juzu'i mai yawa, jerin tsaka-tsaka mai sanya dumama mai kerawa da haɓaka musamman don wannan aikin.
Tsari An kammala gwaje-gwajen farko akan samfurin ba tare da bargon zafi ba. Ana zame thermocouple tsakanin zoben tagulla da bututun ƙarfe don auna zafin jiki. An auna bangaren
4.940 ”(a yanayin zafin jiki tare da ma'aunin ID.) Sashin ya kai 1000 ° F (538 ° C) a cikin kimanin minti 10.
Shafin da ke ƙasa yana nuna kwatancen tsakanin ka'idoji da sakamakon gwajin da aka auna

Sakamako / Fa'idodi Sashin yakai 4.975 "a 1000 ° F wanda ya samar da faɗaɗawar 0.035" (4.975 debe 4.94). A 500 da 800 ° F lambobin faɗaɗa sun kasance 4.950 da 4.964 bi da bi. Lokacin amfani da
bargo mai zafi ana rage lokacin zafi da kamar dakika 90 (minti 8.5 akasin minti 10).

Karkatar da Cutar Hoton Filayen Fasaha

Rashin wutar lantarki na kwantar da hankalin kwalliya tare da IGBT Ƙungiyar Yankewa ta Kyau

Makasudin Gasa takalmin ƙarfe a cikin bututun filastik zuwa 250 ° F (121.1ºC) don a sake haɗa wani bututun catheter da shi.
Abunda yakai 0.05 ”(1.27mm) tubes na catheter na diamita, wasu tare da takalmin karfe, sandar sandar
Zazzabi 250 ° F (121.1ºC)
Yanayin 306kHz
Kayan aiki • DW-UHF-4.5kW tsarin zafin shigarwa sanye take da matattarar aiki tare da itor 1.2 μF capacitor
• coarfin zafin mai sanyawa wanda aka tsara kuma aka haɓaka musamman don wannan aikin.
Tsari Ana amfani da keɓaɓɓen keɓaɓɓen littafi don dumama ƙarfe na ƙarfe don sake kunna filastik. Don kula da madaidaicin cikin diamita na tubing. An saka sandar yumbu ta tubing. Ana amfani da zafi na dakika 3.5 don kaiwa 250 ° F (121.1ºC). Braarfin ƙarfe ya narke filastik kuma ya haifar da haɗin gwiwa.
Sakamako / Amfanin Induction dumama yana samarwa:
• Gudanar da aikace-aikacen gaggawa na zafi
• Sakamakon, sakamakon maimaitawa
• Makaman makamashi